Advertisement
Quick Links
Included Equipment
USB Link
Recommended Items
PASCO PASPORT Compatible Interface*
PASCO Data Acquisition Software*
Optional Items
PASPORT Sensor Extension Cable
PASPORT Analog Adapter or Digital Adapter
*See the PASCO catalog or the PASCO web site at www.pasco.com for more information.
Quick Start
•
Plug the USB Plug into a USB port on a computer
or into a port on a USB hub connected to a com-
puter. (Look for the USB icon.)
•
Connect a PASPORT sensor to the mini-DIN port
on the other end of the USB Link. Note that a
PASPORT sensor will connect to the USB Link in
only one way. Match the groove on one side of the
sensor or sensor plug with the alignment tab on the
bottom lip of the USB Link
•
If you have an analog sensor with a five pin or
eight pin DIN plug, or a digital sensor with a phone
plug, connect the sensor to a PASPORT Analog Adapter (PS-2158) or a PASPORT Digital Adapter
(PS-2159), and then connect the adapter to the USB Link.
USB Link
PS-2100A
USB Plug
USB icon
800-772-8700
+1 916 786 3800
Instruction Sheet
Light Emitting Diode (LED)
connection indicator
Nine pin mini-DIN Port
Part Number
PS-2100A
Part Number
see www.pasco.com
see www.pasco.com
Part Number
PS-2500
PS-2158 or PS-2159
PASPORT
Sensor plug
OR
PASPORT Sensor
support@pasco.com
0 1 2 - 0 9 9 8 9 B
Alignment
tab
USB Link
www.pasco.com
Advertisement
Related Manuals for PASCO PasPort PS-2100A
Summary of Contents for PASCO PasPort PS-2100A
- Page 1 PASPORT Sensor Extension Cable PS-2500 PASPORT Analog Adapter or Digital Adapter PS-2158 or PS-2159 *See the PASCO catalog or the PASCO web site at www.pasco.com for more information. Quick Start • Plug the USB Plug into a USB port on a computer or into a port on a USB hub connected to a com- puter.
- Page 2 I n t r o d u c t i o n Introduction The PASCO PS-2100A USB Link is an interface that uses the Universal Serial Bus protocol to enable communi- cation between PASCO sensors and a USB-compatible computer that is running PASCO’s data acquisition soft- ware*.