RCD 40103/202/3/5/10 Operating & Safety Manual

10kVA Site Transformer
Operating & Safety Guide 620
16A
MCB
16A
Socket
32A
32A Socket

EQUIPMENT CARE

Transformers
Never push the equipment beyond its design
limits. If it will not do what you want with reasonable
ease and speed, assume you have the wrong tool for the
job. Contact your local HSS Hire Shop for advice.
Handle the equipment with care. Avoid dropping it,
knocking it, or otherwise exposing it to damage.
Designed to convert 230V power to 110V.
Keep the equipment clean - you will find this less of a
Ideal for powering equipment made for
chore if you clean it regularly, rather than wait until the
end of the hire period.
use on building sites.
When not in use, store the equipment somewhere
clean, dry and safe from thieves.

FINISHING OFF

Switch OFF and unplug all electrical equipment
...any comments?
connected to the transformer. Switch OFF the
power supply to the transformer, then unplug or, if If you have any suggestions to enable us to improve
required, have a qualified electrician disconnect
the information within this guide please fax your
the unit.
comments or write to the Product Manager at the
Give the unit a final clean up ready for return, to
address below
your local HSS Hire Shop.
Fax: 020 8687 5001
©HSS Hire Service Group Plc 2003 No. 620/04
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
Code 40103/202/3/5/10