Download Print this page

Aqua Free AS Fill season Instructions For Use

Advertisement

Quick Links

5 Duration of use / Changing the filter
Depending on the frequency of use and water quality, the filter can be used for one season (i.e. up to 6
months after first-time use). If the water flow is so low as to be insufficient, the filter should be changed
before this period is up. Connections and accessories can be re-used. Please ensure that the device
maintains an impeccable hygienic and functional condition.
Changing the filter:
Lay out a new
AS Fill
season filter for changing.
Unscrew the connections from the used filter, disinfecting/cleaning if necessary, and screw them onto
the new filter (see 3).
Continue as described in 4.
Dispose of the used filter as household waste.
6 Technical data
Abmessungen:
L 150 mm x Ø 61 mm
Dimensions:
L 150 mm x Ø 61 mm
Membrane:
Hollow-fibre membrane
(microfiltration)
Bacteria retention:
99.99999% / Log 7
Duration of use:
1 season
(approx. 6 months, max.
13 m
)
3
The manufacturer does not accept any liability for damage to the filter incurred by non-compliance
with these instructions for use.
In the event of a malfunction, the product should be returned to Aqua free using the "Complaints Report"
form (can be downloaded in the Service area at www.aqua-free.com).
Aqua free Solutions Ltd.
The Media Centre, 7 Northumberland Street
Huddersfield, HD1 1RL, Great Britain
E-mail:
info@aqua-free.co.uk
Phone:
+44 (0)1484 483045
Flow rate:
22 l/min
(initially, at 5 bar, 20 °C)
Operating pressure:
3 bar to max. 5 bar
Chlorine resistance:
≤ 10 ppm
Connection:
G½˝ screw thread
Headquarters:
Aqua free GmbH
Winsbergring 31
22525 Hamburg, Germany
E-mail:
info@aqua-free.com
Phone:
+49 (0)40 46899990
Fax:
+49 (0)40 46899999
Instructions for use
AS Fill season
To ensure the safe operation of your filter please read this
information prior to use and follow all instructions carefully.
Table of Contents
1 Product and Application
2 Scope of supply and accessories
3 Preparing the filter for first-time use
4 Handling the filter
5 Duration of use / Changing the filter
6 Technical data
1 Product and Application
The
AS Fill
season bacteria filter is specifically designed
for filling mobile tanks used in recreational vehicles (such
as motorhomes, caravans or boats) with bacteria free water.
The filter is connected to the end of the filling hose using a
standard hose adapter creating a physical barrier for germs
and dirt particles directly before entry to the tank. The 0.2 µm
membrane inside the filter ensures that any harmful bacteria
or particles are blocked. This bacterial retention complies with
the Log 7 medical standard with the result that only clean
water enters the tank and the drinking water system.
Please note the following:
Before using the filter for the first time, the entire drinking
water system in your camper van or boat should be
thoroughly cleaned and disinfected. If you have any
questions relating to cleaning/disinfection, please contact
your specialist dealer.
www.aqua-free.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the AS Fill season and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Free AS Fill season

  • Page 1 Changing the filter: Instructions for use • Lay out a new AS Fill season filter for changing. • Unscrew the connections from the used filter, disinfecting/cleaning if necessary, and screw them onto AS Fill season the new filter (see 3). • Continue as described in 4. • Dispose of the used filter as household waste. To ensure the safe operation of your filter please read this information prior to use and follow all instructions carefully.
  • Page 2 2 Scope of supply and accessories 4 Handling the filter • Use a hose with an appropriate adapter to connect the filter. Scope of supply • If a suitable adaptor is not fitted, use the supplied hose AS Fill season set with case: adapter (5). Attach it to the hose and secure it tightly to Storage case with basic accessories avoid leaks. and bacterial filter • Remove the sealing caps from the filter connectors and store 1 AS Fill season filter in a safe place. 2 2 x G 1/2” connectors Flow direction 3 6 x sealing caps • Connect the filter inlet connector to the hose adapter (5). 4 Filling hose with adapter Inlet side 5 Hose adapter for 13 mm G½” hose Please note the flow direction of the filter (see arrow on the filter).