ekco Woodstream Dog Crate Instructions

1. Lay folded dog home on floor with pan on
the bottom. (A)
2. Lift top 2 wire mesh panels and open
completely like a book. (B)
3. With one hand, grasp the top wire mesh
panel lift, swing up to form a box. (C-D)
4. Holding the box steady, lift the end panel
on top into an upright position.(E)
5. Pull outward on end panel, engage hooks
on each side.
6. To secure top of end panel, lift up on top
of crate and pull end panel toward you,
clearing underside of top hook. Engage
end panel in hook.
7. Repeat steps 6 & 7 for remaining end
panel.
To open door:
1. Push in and hold flat lever to release lock.
2. Use other hand to lift door straight up
vertically and out of lock and door
retainers.
3. Door opens from the bottom and swings
up to lay flat on the top of home.(F)
To close door:
1. Swing door from the top of home to the
closed position.
2. Lift door vertically. Push inward and down
behind door retainers until latch catches.
To remove pan:
1. Lift pan retainer bar upward to disengage
hook.
2. Swing retainer bar out of the way and
remove pan.

Dog Crate Instructions

A
C
E
F
B
D