Table of Contents
Advertisement
Quick Links
1.0 SAFETY INFORMATION
•
The provision of the electrical supply and the connection of the unit to the electrical supply must
be carried out by a qualified electrician.
•
This unit must be earthed.
•
All-pole disconnection from the mains as shown in the wiring diagram must be incorporated
within the fixed wiring and shall have a minimum contact separation of 3mm in accordance with
latest edition of the wiring regulations.
•
Isolate from power supply before removing any covers. During installation / maintenance ensure
all covers are fitted before switching on the mains supply.
•
Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Duct
runs terminating close to the fan must be adequately protected by suitable guards.
•
Sharp edges need to be handled with caution; most of the air handling equipment will contain
sharp edges on the internal and external surfaces. Care should be taken to ensure that all
personnel are aware of this and precautions are implemented to ensure no wounding is caused.
•
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the safe use of the appliance by a person responsible for their safety.
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried
out by children.
1.1 Symbols
GENERAL WARNING
Signifies a general warning regarding hazard specified by supplementary information.
ELECTRIC SHOCK
This unit must be completely electrically isolated before any panels are removed. Check
mains supply and control connections.
ROTATING PARTS
This unit contains fast moving rotational parts which may start automatically. It is the
sole responsibility of the installer to adequately guard these components.
REFER TO INSTRUCTION MANUAL
Read and understand the installation and maintenance manual before installing,
operating or maintaining this product.
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
BESPOKE BOXER
Air Handling Units
Installation Manual
22. 04. 21. Document Number 671506
1
Advertisement
Table of Contents
Summary of Contents for NuAire BESPOKE BOXER
- Page 1 REFER TO INSTRUCTION MANUAL Read and understand the installation and maintenance manual before installing, operating or maintaining this product. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
-
Page 2: Personal Protective Equipment
- when conducting light work on the unit requiring tactile dexterity. BESPOKE BOXER units are delivered to site control free as standard, allowing them to be integrated with control systems supplied by •Safety Glasses - when conducting any cleaning/cutting operation others. - Page 3 For shorter modules the fork lifting points will be along the length of the section, without a covered channel (Figure 2). Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
-
Page 4: Mechanical Installation
Door locking mechanisms may also have to be adjusted. Nuaire cannot be held responsible for the units failing a site leakage test if the above have not been carried out correctly. 3.3 Modular Unit Section Joints All sections should be accurately aligned and adjoined prior to bolting together using the fixings and gaskets provided by Nuaire. -
Page 5: Condensate Drains
Extra precaution should be taken to prevent pipe damage on site, as the fragile pipework will protrude from the side of the unit. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506... - Page 6 •Store the transit brackets and bolts in a safe location if required for future use. Fan Transit Brackets (AC Fans) Front Withdrawal Bag Filters Transit Transit Bracket Bracket Bolt Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
-
Page 7: Electrical Installation
Aout Analogue output 0-10 VDC, max. 5 mA, output of the current motor level control coefficient / motor speed parametrisable curve; SELV Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506... - Page 8 Dimensions H x W x D 198 x 164 x 60 contactor. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
-
Page 9: Fan And Motor
Fan bearings should be manually checked at regular intervals for condition. Standard fan bearings are supplied as ‘sealed for life’ and have an anticipated life of 40,000 hours. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506... - Page 10 •Humidifier condensate drip tray water. 6.5 Gas Fired Heater •Evaporative humidifier. If a gas fired heater is intended to be used with low air on temperature please discuss with Nuaire prior to order placement to ensure a suitable •Cooler drains. component selection. •Water reservoirs.
-
Page 11: Warranty
•Check filters and change/clean if required, failure to do so may impair the performance and energy efficiency of this unit. Ensure that Nuaire product is made safe from any electrical / water / refrigerant supplies before dismantling commences. This work •Ensure condensate drains are cleaned clear and that water can... -
Page 12: Service Chart
Clean the fan impeller, casing, unit casing. Check the bearings. Casing Check that the doors are tight. Clean inside and outside if necessary. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506... - Page 13 GENERAL In addition to the particular requirements given for the individual product, the following The equipment referred to in this Declaration of Incorporation is supplied by Nuaire to general requirements should be noted. be assembled into a ventilation system which may or may not include additional Where access to any part of equipment which moves, or can become electrically live are components.
- Page 14 BESPOKE BOXER Installation Manual NOTES Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
- Page 15 BESPOKE BOXER Installation Manual NOTES Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
- Page 16 BESPOKE BOXER Installation Manual NOTES Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 22. 04. 21. Document Number 671506...
Need help?
Do you have a question about the BESPOKE BOXER and is the answer not in the manual?
Questions and answers