Advertisement
Mode
Mode
Mode
Design standard:
UL 121201: Ninth Edition
CSA-C22.2 No.213-17
UL 1963: Fourth Edition
CSA-C22.2 No.120-13
IEC: 60079-0, 60079-7
Marking:
Class I, Division 2, Group D T4
In order to prolong the life cycle of the recovery unit, please read the manual carefully before using to fully
understand the safety, specification as well as operating procedure of the recovery unit.
For recovering only HVAC/R refrigerants from sealed HVAC/R systems. Warranty VOIDED if used for
any other purposes.
Only a qualified technician should operate this recovery unit.
Before starting the equipment, make sure that it is well grounded.
If using electrical extension cord, the cord must be in good condition and properly
connected and grounded.
Only a qualified electrician can do the wire connection according to the technical standardand circuit
diagram.
The power must be cut off and no display in LCD before inspecting or repairing.
If the original power supply cord is damaged, an OEM replacement may be ordered throughyour
NAVAC distributor.
Please take power supply and the capacity of your ammeter and electrical wire.
Advertisement
