Table of Contents
Advertisement
INSTALLATION STEPS
3.2 APPLICATION SETTINGS
1. Device name setting: Set the device name.
2. Body temperature setting: Body temperature detection, body temperature alarm, mask detection function switch on and body
temperature threshold.
3. Recognition parameter setting: The lower the threshold, the higher the recognition accuracy, the more the recognition times, the slower
the stranger is reported.
4. Volume setting: Set the volume.
5. Startup settings: Auto-start after booting, and the application will automatically start after exiting.
6. Identification effect display: Setting of the LED light, green light for success (settable display image name), red light for failure, fill light.
7. Apply password setting: Set password, initial password is 123456
8. Camera preview resolution setting: Set the resolution.
9. Screen saver brightness setting: Set brightness.
10. Device restart time setting: Setting of the device restart time.
11.Relay mode.(See Step 1, Connect the gate.)
12. Application initialization: restore the initial application settings.
6
FIGURE 4.
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
