Pure Distilling Spirit Maker Complete Instructions page 10

6. Turn the water on carefully and test the connections for leaks, tighten or fit correctly
any leaking connections.
7. The required water flow is 1 litre a minute, this can be set by measuring how much
water is collected in 30 seconds, doubling it and adjusting water flow as required.
8. We recommend collecting the output in a glass 5 litre demijohn (bottle with a handle)
or a scientific supply measuring jug eg Pourmaxx brand, both available at your nearest
home brew store.
9. Previous versions of the instructions collected directly to the filter system as below:
a. We do not recommend this setup as collecting full strength alcohol into plastic is
poor practice.