System Assembly System Features Assembling the Radiant Cordless ™ The Q-Optics RADSYSC1 Radiant Cordless Headlight features an ™ Headlight is quick and easy. For use, ergonomic and easy to understand control integrated with the battery simply slide the battery onto the pack.
Page 4
Headlight Operation On/Off Using sterile technique gently touch Operating the system is simple and the logo area with a vertical motion intuitive; power the light on and off with a to turn ON or OFF the headlight. simple touch of the logo area. Suggestions Anti-curing –...
Page 5
The Q-Optics Radiant Cordless Headlight mounts easily via ™ the “Quick Connect Mount” enabling use with the Q-Optics Headband, most brands of custom TTL style loupes, most brands of flip style loupes, eyeglasses, and safety glasses. Attach the headlight by sliding the quick Mounting clip styles will vary.
Using the Power Supply READ THESE INSTRUCTIONS BEFORE USING POWER SUPPLY 1. Plug power supply USB-C cable 2. Plug power supply into into bottom of the battery pack. electrical outlet. NOTE: The light will not run when the USB cable is plugged into a power source.
1. Do not throw headlight, battery pack or charger in the trash. WARNING: Disconnect equipment from line voltage. Failure to observe this warning may 2. Contact your local authorities for disposal or return to Q-Optics for free disposal. result in personal injury, death, or equipment damage.
Need help?
Do you have a question about the Radiant RADSYSC1 and is the answer not in the manual?
Questions and answers