Cleaning Method For Pre-Filter - Horizon Fitness HA 500 User Manual

7. CLEANING METHOD FOR PRE-FILTER

• Clean the pre-filter with a soft cleaning brush or va-
cuum cleaner once a month
• When using vacuum cleaner, clean softly with the
lowest suction power.
• Do not use benzene, alchol, volatile detergents and
hot water (over 40ºC) that cause damages and dis-
coloration.
• Adjust the cleaning cycle depending on the amount
of the air purifier used or air pollution aorund.
HOW TO CLEAN THE PURIFIER
1. OUTSIDE
2. INSIDE
HOW TO CLEAN THE DUST SENSOR
• Disconnect the power cord before cleaning.
• Open the cover of the dust sensor on the rear and wipe
the lense carefully with a cotton swab.
• Clean the dust sensor once every 6 months.
• You can adjust the cleaning cycle depending on the
amount of the purifier used or air pollution around.
Clean the purifier with a cloth soaked
with water or neutral detergent. And
wipe it with a dry cloth.
Open the cover filter on the rear and va-
cuum inside.
19