Eagle Tree Systems Guardian ET-GUARD Instruction Manual

Stabilization expander

Advertisement

Quick Links

Instruction Manual for Guardian
Contents
Introduction ............................................................................................................................................................................ 1
Connection and Mounting ...................................................................................................................................................... 2
Important Differences in OSD Pro Configuration when using Stabilization ........................................................................... 2
Guardian Stabilization On-screen Menus ............................................................................................................................... 3
Guardian Configuration .......................................................................................................................................................... 3
The Servo Analysis Wizard ................................................................................................................................................................................................................ 4
Reset Cruise Sticks/Throtl .................................................................................................................................................................................................................. 4
Tuning Stabilization Gains ....................................................................................................................................................... 4
Stabilization Theory ........................................................................................................................................................................................................................... 4
Stabilization "Master Gain" Knob ...................................................................................................................................................................................................... 5
Displaying the Master Gain Onscreen ................................................................................................................................................................................................ 5
Oscillations ........................................................................................................................................................................................................................................ 5
Additional Features ................................................................................................................................................................. 5
Center-Stick Only Stabilization .......................................................................................................................................................................................................... 5
Heading Hold (Recommended) .......................................................................................................................................................................................................... 5
Preflight ................................................................................................................................................................................... 6
First Flight ................................................................................................................................................................................ 6
Troubleshooting ...................................................................................................................................................................... 6
Introduction
Thank you for your purchase! This instruction manual will guide you through the installation and operation of your Guardian Stabilization Expander. The latest
version of this manual is available in the Product Manuals section of the Support tab on http://www.eagletreesystems.com. The online manual includes any updates that
were made after your Guardian was purchased. Please read the entire manual carefully before proceeding. If, after you read the manual, you have further questions or
problems, see the "Have Questions or Feedback?" section below.
What the Guardian Does
When used with the Eagle Tree OSD Pro
sensors are required.
The Guardian requires no warm-up period after your model is powered. The Guardian's advanced features make it easy for you to perform aerobatic maneuvers (if you
are capable!) and immediately return to stabilized flight when desired.
The Guardian is a stabilizer, not a stall-preventer! In some airframes, stalling can create unrecoverable conditions, such as spins, that may result in a crash. Make
sure that you operate your model in a way that avoids stalls.
Intended Uses
The Guardian is intended to be used exclusively for recreational purposes in model planes, boats and cars. Any other use is not supported.
Packing List
Your package should include the following: The Guardian, and a printed version of this manual.
Other Things You Need
To utilize the Guardian, you will need the OSD Pro system with an eLogger V3 or V4. Though stabilization will work without them, a video camera and video
transmitter on your model, and a video receiver and video display on the ground are normally required. Many Eagle Tree FPV dealers sell the required video
equipment. A list of our FPV dealers can be found on our website at http://www.eagletreesystems.com/OSD/OSD-Pro.htm.
Steps to Follow
Installation and use of your Guardian should be quite easy and enjoyable if you follow these few steps:
1.
First, if you have not done so already, read through the manuals for your OSD Pro, eLogger, GPS Expander, and any other Eagle Tree sensors, to familiarize
yourself with the connection and function of these devices, and set this equipment up.
2.
Read through this manual to understand the warnings, determine the installation and setup sequence, pre-flight tests, etc., of the Guardian.
3.
If anything is unclear, see the "Have Questions or Feedback?" section below.
4.
Range test and enjoy!
Copyright © 2011 Eagle Tree Systems, LLC
Document Version 1.5
Corresponds to Eagle Tree Software Version 10.01 or higher
TM
, the Guardian provides full featured inertial stabilization, and an on-screen Artificial Horizon display. No additional
TM
Stabilization Expander
1
http://www.eagletreesystems.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Guardian ET-GUARD and is the answer not in the manual?

Questions and answers

Summary of Contents for Eagle Tree Systems Guardian ET-GUARD

  • Page 1 Read through this manual to understand the warnings, determine the installation and setup sequence, pre-flight tests, etc., of the Guardian. If anything is unclear, see the “Have Questions or Feedback?” section below. Range test and enjoy! Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com...
  • Page 2 Use the stabilization gain setting instead. • If you have previously configured RTH with your OSD Pro, it is recommended that you return all RTH gains/limits to their default values when stabilization is enabled. Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com...
  • Page 3 (normally the maximum throw). Do the same with the elevator stick when requested to “Mov Elev Tx Stick Back(Climb).” Note: When not using the Guardian, the amount of stick deflection during the wizard was used to set the maximum elevator and Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com...
  • Page 4 It is recommended that the Overall Gain be used to tune the airframe until it oscillates and then be turned back down. This will ensure the best performance while preventing future oscillations. Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com...
  • Page 5 After trimming, Center Stick Box remember to execute the “Reset Cruise Sticks / Throtl” command Sticks / Throtl” command to ensure full stabilization. Heading Hold (Recommended) Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com http://www.eagletreesystems.com...
  • Page 6 Issue: The message "Stabilizer using Menu Gain!" appears on the video screen during OSD Pro startup. Solution: This message indicates that the Aux2 input for Overall Gain adjustment is not being used. The menu overall gain setting will be used instead. Copyright © 2011 Eagle Tree Systems, LLC http://www.eagletreesystems.com...
  • Page 7 Limited Warranty Eagle Tree Systems, LLC, warrants the Guardian to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. This warranty is nontransferable. If your unit requires warranty service during this period, we will replace or repair it at our option. Shipping cost to us is your responsibility.

Table of Contents