Settings - Shell Energy SMETS1 Manual

Settings

Using your 'Settings' button you can change the features on your IHD, including
sounds, alerts and the way you budget.
1
2
3
4
Account information – default screen
1.
Under 'Info' you can view the meter serial number, IHD serial numbers,
electricity MPAN and gas MPRN supply point numbers.
2.
For Targets see page 12.
3.
The Sound can only be switched on/off.
4.
The LEDs can only be switched on/off.
5.
Using the Backlight button to select whether you want the display lit up all the
time or if you prefer it to switch off after one minute. The light will come back on
if you tap the screen. (Remember the light uses such little energy to run, it'd cost
you approximately 20p a year if it was on all the time).
6.
Network - you can't alter this.
7.
Contrast can be pressed to lighten or darken the screen.
8.
Erase - you can't alter this.
Smart meter user guide | 17
6
8
5
7