Use - Oceanic OCEACLIM140W Instruction Booklet

A. Use of the control panel
1. Putting on the appliance and mode choice:
To put the appliance into operation, connect the electrical cable to a wall outlet.
The appliance will then emit a beep sound. Press on the
the device, which another beep sound will be emited, then press the
to choose your operation mode from the available ones:
A touch on the
2. Setting of the temperature
The temperature can be adjusted, each time by 1°C by pressing the "+" or "-"
button, to go between the range of 15°C to 31°C.
Press the "+" or "-" button to increase or decrease the temperature by 1°C.
The LED display shows the set temperature for 5 seconds, then displays the
room temperature.
3. Setting the speed of the fan:
Press the
intermediate, fast):
4. Activitating the sleep function
When you press the
Automatic mode
Cool mode
Fan mode
button allows you to change from one mode to another.
button to select the fan speed from the available (slow,
button again, the device beeps and turns off.
IV. USE
48
button to turn on
button