Table of Contents Functional description of the UPS Connections Programming connector and LED Cables Adjusting the UPS Test unit India http://www.inepro.com Version 1.1.0 Inepro B.V.
Page 4
In test a 75 minutes operational lifespan of both batteries at continuous use on 1 PayCon is measured. Real lifespan depends on used PayCon configuration. Note: Batteries are chemical waste and must be disposed of according the applying national and local regulations Uninteruptable Power Supply ~ 275707...
Page 6
White / brown Power for UPS (5V). Red / blue Can be plugged in any of the serial connector. Grey / brown / Status signals from UPS Yellow / green Activation White / pink request-signal to UPS Uninteruptable Power Supply ~ 275707...
Page 8
Programming connector and LED Programming connector and LED Programming connector For loading a programme in the microcontroller. Long signal; power from net adaptor Short signal; power from batteries Uninteruptable Power Supply ~ 275707...
Page 12
10 Volt. Adjust the value of R13 till the tension dip stays above the 10 Volt before the UPS battery takes over the power. (see photo) After these actions the UPS is adjusted and the preset pots can be sealed. Now load the final UPS software Uninteruptable Power Supply ~ 275707...
Page 14
Press the print ticket button. (a ticket will be printed) § Load the UPS with the final software. § Push the stop button. § Remove the UPS and place the UPS together with the ticket in an anti static (transport) bag Uninteruptable Power Supply ~ 275707...
Need help?
Do you have a question about the 275707 and is the answer not in the manual?
Questions and answers