Related Manuals for Inepro Multi Connectivity Box
Summary of Contents for Inepro Multi Connectivity Box
- Page 1 Multi Connectivity Box Technical Manual | Multi Connectivity Box © 2020 Inepro B.V. All rights reserved...
- Page 3 We want to help you get the best result from your Multi Connectivity Box. This manual contains information on how to do that; please read it carefully. Due to continuous product improvements this manual is subject to changes without notice.
- Page 4 Multi Connectivity Box All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher.
-
Page 5: Table Of Contents
Table of Content Introduction Installation ..................................4 1 Hardware Appendices ..................................8 1 Appendix I: Connection to I/O modules Notes End User Licence Agreement Version 1.0.2 © 2020 Enter your company name http://www.inepro.com... -
Page 7: Introduction
Introduction Part... - Page 8 Introduction The Multi Connectivity Box let's you turn on and check the status of up to four devices. Not only that, it will also enable you, using KUARIO, to make those devices (or their services) authenticable and payable. So consider to leave those key and/or...
-
Page 9: Installation
Installation Part... - Page 10 In the I/O module DIP switch 1 is (and must be) set to ON. In this example Output 1 &2 and Input 1 & 2 are connected. Note: This application can only use a single I/O module, it can not be used in a chain with multiple I/O modules! Multi Connectivity Box...
-
Page 11: Hardware
Hardware Customer uses the 4 glands that are together for the 4 inputs and outputs, each gland equals 1 relay + feedback. Customer uses 1 gland (with big grey cable) in addition to the network cable (black cable) to supply the 220V voltage. The input (green &... -
Page 13: Appendices
Appendices Part... - Page 14 P in 5 = relais 2 (4) C ommon P in 6 = not connected P in 6 = not connected P in 7 = relais 2 (4) N ormally O pen P in 7 = relais 2 (4) N ormally O pen Multi Connectivity Box...
-
Page 15: Appendix I: Connection To I/O Modules
Appendix I: Connection to I/O modules Inputs How to use the inputs: By short-circuiting the input 1 + with the input 1 - the status of input 1 has been changed. The input triggers when the current is or exceeds 0,6 mA. The maximum current can be 1,5 mA. The maximum resistance in a field cable is 4 Kilo ohms. -
Page 17: Notes
Notes Part... - Page 18 Notes § Notes This area is meant for the reader's notes: Multi Connectivity Box...
-
Page 19: End User Licence Agreement
7. Update Checks. You acknowledge and agree to allow Inepro Back Office Suite version and license status details to be sent to Inepro BV when you request to "Check for updates". This allows the Inepro Back Office Suite software to determine whether software updates are available in real-time.