Package Content - NATEC EXTREME MEDIA SOHO User Manual

PACKAGE CONTENT

Wireless earphones NSL-1337
MicroUSB cable
Manual
2.
4.
1.
3.
REMOTE
– Play / Pause
1 – Assistant [hold 2 sec.]
– On / Off [hold 4 sec.]
– Volume [+]
2
– Skip track [hold 2 sec.]
– Volume [-]
3
– Previous track [hold 2 sec.]
4 – LED
5 – Micro USB charging port
6 – Microphone [at back]
PAIRING NEW DEVICE WITH THE EARPHONE
Warning! If device, that was previously paired with earphones is in range of
the earphones, then its Bluetooth should be turned off or the pair should be
unpaired.
1. Enable pairing mode in the device you want to pair earphones with.
2. Hold On [1] button for 4 seconds, LED [4] will start blinking in blue-red
colors.
3. Select NSL-1337 from the list of available devices on your device.
4. Earphones will confirm connection with short voice prompt and the LED
[4] will turn red.
CONNECTING PREVIOUSLY PAIRED DEVICE
WITH THE EARPHONES
1. Turn on Bluetooth in the device, that was previously paired with
earphones.
2. Hold On [1] button for 4 seconds.
3. Devices will pair automatically, and LED [4] will start blinking in blue.
EN
6.
5.