Download Print this page
OEM 24366 Operating Instructions And Parts Manual

OEM 24366 Operating Instructions And Parts Manual

Auto circuit tester

Advertisement

Quick Links

Operating Instructions and Parts Manual
24366
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Auto CirCuit tester
For Customer serviCe
CALL 1-866-458-2472
www.oem-tools.com
For safety purposes and the prevention of damage to expensive electronic components it is advised that the
user have an understanding of basic electrical theory and a working knowledge of automotive electrical systems.
4/13
1
2013 ©OEM-TOOLS

Advertisement

loading

Summary of Contents for OEM 24366

  • Page 1 Operating Instructions and Parts Manual 24366 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
  • Page 2 Limited 90 dAy WArrAnty from state to state. OEM will not be responsible for any conse- If within 90 days from date of purchase, this product fails due to a defect in materials or workmanship, return the product with quential or incidental damages arising from the breach of this or any other warranty, whether expressed, implied or statutory.
  • Page 3 Parts manual 24366 Auto CirCuit tester GettinG to KnoW your Auto CirCuit tester If you use the “polarity switch” to test, please add the extended-probe tip to its probe. As shown in the figure 1. Cigarette lighter adapter For example: 1.
  • Page 4 Parts manual 24366 Auto CirCuit tester mode instruCtion seLF-test The unit has four modes, the four modes can be If the unit is working correctly, the conditions should selected by depressing the mode select button and be as follows: cycling through each one.
  • Page 5 Parts manual 24366 Auto CirCuit tester ConduCtivity test ACtivAte ComPonents WitH Positive The technician can test the conductivity between wires voLtAGe onLy or components which have been disconnected from The technician can use this unit to provide positive the vehicle’s electrical system.
  • Page 6 Parts manual 24366 Auto CirCuit tester ACtivAte tHe ComPonents WitH neGAtive trAiLer LiGHt test voLtAGe onLy To test trailer light wiring, you need to follow this Apart from applying positive voltage, the technicians procedure: can also use this unit to provide ground to the 1.
  • Page 7 Parts manual 24366 Auto CirCuit tester meAsurinG tHe FrequenCy oF tHe HiGH- muLti-CyLinder GAsoLine enGine WitHout tension iGnition PuLses distriButor This unit can measure the frequency of the high-tension Bring the detection head close to the place where the ignition pulses.
  • Page 8 Parts manual 24366 Auto CirCuit tester For Customer serviCe CALL 1-866-458-2472 www.oem-tools.com 3/13 2013 ©OEM-TOOLS...