ACTiSYS IR8200L Supplementary Manual page 4

1) Keeping IR8200L power on.
2) Run COM_12.exe
3) Turn on the Device B and then active IR service program.
4) You can see "......**********" on the DOS screen.
5) Stop listening program, the program will generate a BIN file (LOG_RAW.BIN).
6) Rename LOG_RAW.BIN to REC2.BIN
Another device
can link with
IR8200L
(Device B)
c) The third IR traffic record:
1) Keeping IR8200L power on.
2) Run COM_12.exe
3) Remove Device B and then place Device A (HP Jornada).
4) Active IR service program under Device A.
5) You can see "......**********" on the DOS screen.
6) Stop listening program, the program will generate a BIN file (LOG_RAW.BIN).
7) Rename LOG_RAW.BIN to REC3.BIN
===================== END ===================
< IR link
ACT
IR910D1 IR910D2
IR8200L
>
ACT
To PC Com port
Run COM_1.exe
or COM_2.exe