Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for PRESONUS AVB-D 16
- Page 1 AVB-D 16 16x16 AVB-to-Dante Bridge Owner’s Manual ® English www.presonus.com...
-
Page 2: Table Of Contents
About This Manual — 1 What’s in the box — 2 What Else You Need — 2 1.3.1 Companion PreSonus Products — 2 Connections and Controls — 3 Front Panel — 3 Rear Panel — 3 Network Setup — 4 Recommended Network Setup Example —... -
Page 3: Overview
Overview Introduction Welcome to a whole new world of possibilities! The AVB-D 16 is your bridge between an AVB network and Dante network. This 16x16 bridge converts 16 channels of audio from AVB to Dante and 16 channels of audio from Dante to AVB. It has a built-in asynchronous sample rate converter (ASRC) to ensure your media clock remains solid and reliable on both networks. -
Page 4: What's In The Box
AVB-D 16 Overview Owner’s Manual What’s in the box What’s in the box In addition to to a Quick Start Guide, your AVB-D 16 package contains the following: AVB-D 16 16x16 AVB-to-Dante bridge Power Supply What Else You Need 1.3.1 AVB Switch. -
Page 5: Connections And Controls
Dante networks. Rear Panel 1. Power Inlet. This is the connection for your AVB-D 16 power supply. 2. AVB Network. This locking EtherCON connector can be used to connect your AVB-D 16 to your AVB network. -
Page 6: Network Setup
The AVB-D 16 bridges between two different audio network protocols: AVB and Dante. PreSonus recommends configuring each protocol as separate networks before using the AVB-D 16 to bridge them. This means that both the AVB and Dante networks should exist on their own switches and devices. Dante devices should not be connected to the AVB network switches and vice versa. -
Page 7: Managing Each Network
2. Connect a computer to the same AVB network as the AVB-D 16 either wired or wirelessly. 3. Launch UC Surface on the computer and select the AVB-D 16 from the device list. 4. Select the Update Firmware button and choose the update file from the browser window. - Page 8 Remote I/O Setup Earmix Setup Digital Patching 4. On the Remote I/O Setup screen you will see the AVB-D 16 in the list of devices on the left hand side of the screen. If you have any NSB-series stage boxes, EFFECTS MASTER...
-
Page 9: Method 2: Uc Surface Setup
3. In the top right area of this view, select the Remote I/O Setup tab. On the Remote I/O Setup view you will see the AVB-D 16 in the list of devices on the left hand side of the area. If you have any NSB-series stage boxes, EarMix 16M or other StudioLive Series III mixers on the AVB network, you will also see them in the list. - Page 10 StudioLive Series III ecosystem! Dante Network Setup When connected to a Dante network, the AVB-D 16 will function just like any other Dante device. In order to set it up and route audio to and from your AVB-D 16, you’ll need to use the Dante Software Controller application. Be sure your computer running the Dante Software Controller is connected to the same network as the Dante side of the AVB-D 16.
-
Page 11: Technical Information
AVB-D 16 Technical Information Owner’s Manual Specifications Technical Information To mount your AVB-D16 to a rack shelf, use a M5x0.8 screw that is 6-10mm in length depending on the thickness of your shelf. Specifications Digital Audio AVB Audio Network Port EtherCON™... - Page 12 Integration, and XMAX are trademarks or registered trademarks of PreSonus Audio Electronics, Inc. Capture, Impact, Mixverb Presence, RedLightDist, SampleOne, Studio One, and Tricomp are trademarks or registered trademarks of PreSonus Software Ltd. Mac and Mac OS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S.
- Page 13 AVB-D 16 16x16 AVB-to-Dante Bridge Owner’s Manual 18011 Grand Bay Ct. • Baton Rouge, ® Louisiana 70809 USA• 1-225-216-7887 Part# 70-220000159-A www.presonus.com...