Table of Contents
Advertisement
Quick Links
Manual for Joystick BT-1
As a joy stick for primary users, ST-2 has 8 channels(3proportional & 5 on-off button/trigger) . In
addition to the three main channels, another five offer other functions including turning, on & off,
and revert.
1.Explanation
Any bottoms and control stick are mapping with particular channels. (See picture below) For
example, the control stick left and right is mapping with channel 1, and spin move is mapping with
channel 4. However, the out-put channels on joy stick are programmable. The cooperation of
channels on joy stick and servos is set on the System1.5 controlling board. You can set the first
channel on servos by moving joy stick left and right, or by moving joy stick forward and backward;
first channel on servos control Ailerons, which can also be controlled by other channels. More detail
programing; please refer to the manual of System1.5.
Entire Contents © Copyright 2010
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for FPV BT-1
- Page 1 Manual for Joystick BT-1 As a joy stick for primary users, ST-2 has 8 channels(3proportional & 5 on-off button/trigger) . In addition to the three main channels, another five offer other functions including turning, on & off, and revert. 1.Explanation Any bottoms and control stick are mapping with particular channels.
- Page 2 2. Operation Details 2.1 BT-1 Channel 1: This is a proportional channel. The left and right move on joy stick can proportional controls the left-right move on servos. Different servos might move differently from what you can see below: 2.2 BT-1 Channel 2: This is a proportional channel.
- Page 3 2.5 BT-1 Channel 5: This is an on-off button. The button on joy stick controls the left-right move to end on servos. Different servos might move differently from what you can see below: 2.6 BT-1 Channel 6： This is an on-off channel. The a & b button on the left and right of joy stick controls the left-right move to end on servos.
- Page 4 3. Advanced settings: On BT-1, users can set channels by preference. Please refer to the buttons in colors below: 3.1 Reverse settings: 1. Unplug the System1.5 control board, press button 2(without connecting to BT-1) 2. Put the plug of BT-1 into the System1.5 board.
- Page 5 Push button 5，when hear a beep sound，BT-1 output channel 5 is in normal operation，push button5 again to reverse. Push button 6，when hear a beep sound，BT-1 output channel 6is in normal operation，push button6 again to reverse. Push button 7，when hear a beep sound，BT-1 output channel 7 is in normal operation，push button7 again to reverse.
- Page 6 To prevent false operation, only constant push on buttons works for subtrim. Also, users can hear constant beep sound. When finishing subtrimmimg, plug off BT-1 and plug it back to System1.5. Entire Contents © Copyright 2010...
Need help?
Do you have a question about the BT-1 and is the answer not in the manual?
Questions and answers