Page 2
Acoustic Energy loudspeaker. The AELITE Sub is capable of handling 200 watt RMS with a clean bass response extending to 25 Hz in the listening environment. Flexibility in its operation and connection mean the AELITE Sub will complement a wide range of high quality hi-fi and home theatre systems.
FRONT PANEL 1. Crossover frequency knob Adjusts the balance at the crossover point between the bass (low frequencies) from the AELITE Sub and the treble (high frequencies) continuing to the main stereo front speakers. 2. Sub level volume control knob...
Page 4
Connect from the dedicated subwoofer line output on the amplifier to the line input(s) on the AELITE Sub. (A single lead to either input or a ‘Y’ connector to both inputs may be used). The stereo speakers are run direct for higher definition.
Page 5
2. For use with amplifiers having line level pre-amp jacks: The pre-amp outputs of your amplifier can be connected to the line-level inputs on the AELITE Sub. The line level outputs on the AELITE Sub are then connected back to the power amp (main) inputs on your amplifier. This provides the greatest power handling for the stereo speakers.
Page 6
4. For use with televisions with a variable audio output. Some of the latest televisions are equipped with variable audio out puts. These can be connected directly to the line level inputs on the AESPRIT Sub to enhance the bass response of the television’s built-in speaker.
How to use the controls How to use SUB VOLUME CONTROL knob, CROSSOVER FREQUENCY knob and PHASE switch. The volume control, frequency knob and phase switch can be adjusted to match the condition of the listening room and/or the characteristics of the left and right front speakers.
We suggest that you complete details of purchase now and keep this information in a safe place for future reference. Under this warranty Acoustic Energy agrees to repair any defect or, at the company’s discretion, replace the faulty component(s) without charge for parts or labour.
Need help?
Do you have a question about the Aelite Sub and is the answer not in the manual?
Questions and answers