Page 2
GETTING STARTED 1 Micro USB charging port. 6 Right earbud LED indicator 2 Battery level LED indicator. 7 Right touch press control button 3 Lid release button. 8 Left earbud LED indicator. 4 Battery level check button 9 Left touch press control button 5 Charging Cradle Ear wing (S,M,L) Right Earbud...
Page 3
CHARGING YOUR CASE — Charge on the go charging case, with the included micro USB cable for 2-3 hours. — When all LED’s are illuminated battery case is fully charged. — To check the battery level, press the power indicator(4) button located inside the case.
Page 4
CHARGING YOUR EARBUDS — Place Right and Left Earbuds in battery case charging cradle to properly charge. — Earbuds LED indicator will illuminate Red to indicate that they are charging properly. When LED turns off earbuds battery is fully charged.
Page 5
POWERING ON — Remove both earbuds from charging cradle and power on by touch Touch Control pressing the “X” logo for 3 seconds — Earbuds will flash Blue to indicate that they are in Link mode. Right & Left earbuds will automatically link together and LED on both earbuds will (7)(8) remain solid.
Page 6
EARBUD PLACEMENT Insert Insert the earbud into your ear. Rotate Rotate the earbuds to fit snug inside your ear canal. Tuck Tuck the tip of the (10) earwing into the ridge of your ear. *Note: Please avoid touching the “X” logo while positioning in ear, to prevent the earbuds from unintentionaly powering down.
Page 7
PAIRING — Enable Bluetooth search mode on your mobile device and search for pairing name “LYNX-R” or “LYNX-L”, and select it on your mobile phone. Once the earbuds are successfully connected a notification will sound. — Now you can enjoy your true wireless Bluetooth Earbuds.
Page 8
OPERATING BLUETOOTH EARBUDS Function Operation Power On Hold L or R for 3 seconds Power Off Hold L or R for 5 seconds Play/Pause Single tap L or R Answer/Reject Single tap L or R Raise Volume Double Tap R Lower Volume Double Tap L Change Previous...
Need help?
Do you have a question about the LYNX and is the answer not in the manual?
Questions and answers