Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Twist IPAD HOLDER
- Page 1 TWIST IPAD HOLDER product set up instructions 19968...
- Page 2 Twist iPad Holder Setup Instructions...
- Page 3 Place the Twist base on the floor. 1. Place the first Twist extrusion into the base. 2. Take the second Twist extrusion and place into the hole located at the top of the first one, twisting it 90 degrees to lock it in place.
- Page 4 Twist iPad Holder Setup Instructions Insert iPad arm into the middle TWIST extrusion. Attach top Twist extrusion. Loosely tighten one of the screws to stop it falling down the complete extrusion. 1. Position the arm so that the bolt aligns with the Hang the graphic.
- Page 5 Carefully, push the arm through the graphic. Pull down graphic and attach to the TWIST base. 1. Take the metal rod and connect to the iPad holder. 1. Take the iPad holder and connect it to the arm. 2. Secure it in place by tightening the screw.
- Page 6 Twist iPad Holder Setup Instructions Attach the iPad with the keys provided.
Need help?
Do you have a question about the IPAD HOLDER and is the answer not in the manual?
Questions and answers