Synergy 21 116368 Manual

RF Naked Wall Mounted Remote
Feature
Reliable & stable switch and dimming control function, control range 20M.
Adjustment, match most walls mounted frame in the market.
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
Dimming range 0.1-100%.
Use with power repeater to expand the output power unlimitedly.
Enable to control 1 zones separately, each zone can be set endless receivers, each
receiver maximally be controlled by 8 different remotes.
Enable be dimmed and ON/OFF by push button after connecting receivers.
Parameter
Remote
Operation Voltage
Part No.
116368 3VDC
Receiver
Iuput Voltage
Part No.
103504 12-36VDC
112694 12-36VDC
116291 12-36VDC
111315 12-36VDC
Operation
Remarks
Frequency
434MHz/868MHz RF Wireless
Current Output
4x5A 4x(60-180)W Constant voltage
4x8A 4x(96-288)W
Constant voltage
4x350mA
4x(4.2-12.6)W
4x700mA 4x(8.4-25.2)W
Product Size
Wiring diagram
Operation
Please pair remote and receiver, after finishing connecting receivers with LED lights correctly, base on diagram
above.
1) Press shortly the learning Key on the receiver,then push the rotary button .Once successfully learn, the LED
lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many
optional receivers as you want.
2) Short push rotary button to switch ON/OFF
Adjust dim brightness by the rotary button from left to right 0.1-100%
Adjust dim brightness by the rotary button from right to left 100-0.1%
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
Remarks
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly in the connector
Constant current
7) For update information please consult your supplier.
Constant current
71.5
Power Supply
110V-230VAC
12-36VDC
103504
LED CONTROLLER
Learning Key