Download Print this page

TerraNation HARE KOHU Assembly Instructions

Download this manual

1. Remove rocks, branches and other sharp

objects from the area you will lay on. Spread the

shader evenly on the ground.

4. Pull the drawstring ﬁrmly till upper and

lower parts of the hub connects and the shader

takes its shape.

2. With central hub upright, unfold the poles

and lock the joint.

5. Secure the shader to the beach ground by

inserting the included pegs in the appropriate

housings at the end of each pole.

Assembly

instructions

3. Standing behind the shelter, grab the top

orange drawstring with one hand and hold the top

hub in place with the other.

6. For extra stability secure the shader to the

ground with the outer cords and ﬁll with sand or

pebbles the perimetrical outer pockets.

Need help?

Do you have a question about the HARE KOHU and is the answer not in the manual?

Page 1 Assembly instructions 3. Standing behind the shelter, grab the top 1. Remove rocks, branches and other sharp 2. With central hub upright, unfold the poles orange drawstring with one hand and hold the top and lock the joint. objects from the area you will lay on. Spread the hub in place with the other.
Page 2 Disassembly instructions 3. Unlock the joints and fold the poles on 1. Remove all the pegs and empty perimetrical 2. By holding top hub, push down the orange themselves. pockets. Hold the top hub with one hand and pole till mechanism opens and the shader collapses.