Using A Mobile Device To Control The Air Purifier - UniqAir Uniq User Manual

4

Using a mobile device to control the air purifier

You can operate your Uniq air purifier from a mobile device by
connecting both devices to the same WLAN router at 2.4 GHz.
Follow these instructions to set up mobile control.
1. Download and install the control app on your mobile device from
your device's app store. Apps from different stores:
•
•
2. Plug in the power cord. The air purifier will start and begin
searching for a WiFi connection.
•
3. If no known WiFi network can be found, the indicator light will
turn yellow for 3s, after which the air purifier will automatically
start searching for the WLAN router's WPS signal.
•
4. Press the WPS button on the WLAN router within 2 minutes.
(See your WLAN router's manual for more detailed instructions.)
5. The air purifier's WPS/WiFi indicator will turn green for 2s when the
purifier successfully connects to the WiFi network.
6. If no WiFi network is found, the indicator light will turn yellow.
•
7. Once the air purifier is connected to a WiFi network, it will
automatically start searching for mobile devices on the network
that have the App for Uniq/UniqAir application installed.
10 | U n i q A i r
Google Play: App for Uniq
App Store: UniqAir
The blue WPS/WiFi indicator will flash for 20 seconds
(maximum) during the search.
The WPS/WiFi indicator will flash purple.
You can rerun the search by pressing the WiFi button.
When the indicator is flashing purple, repeat the steps from
point 4 onwards.