Advertisement
Quick Links
USE AND CARE GUIDE
Questions, problems, missing parts?
Contact our customer service department for assistance:
7 a.m. - 5 p.m., CST, Monday-Friday:
Chat: www.edsal.com/chat or www.edsal.com/contact
Email: support@edsal.com
Phone: 1-773-475-3131
To obtain replacement parts please provide: Model Number, Part Number & Description, Store Location and Date Purchased
Important Safety Information
WARNING: Excessive weight hazard!
Do not leave children unattended near overhead rack. High risk of injury if installed incorrectly. Follow instructions
carefully and routinely inspect your system to ensure all components are fastened securely. DO NOT JUMP, CLIMB
OR HANG FROM THIS CEILING RACK. Never install more than one of these ceiling storage rack units on any two
overhead joist supports. Use care when working with metal parts, wear gloves. Do not use this unit for anything other
than the manufacture's intended purpose.
This unit has a total load capacity of 600 pounds of evenly
distributed weight (not to exceed 18.75 lbs. per square foot), using
all 8 lag bolts (included in package) anchored into solid wood
joists or supports capable of supporting such a load. Do not over
load. Do not attempt to mount to steel beams. Be sure overhead
joists and supports are structurally sound. Edsal is not liable for
structure failure, or damage or injury resulting from structure
failure.
Warranty
Edsal Manufacturing Company, Inc. products are guaranteed for a period of one (1) year from the date of purchase. The SOLE AND EXCLUSIVE REMEDY for
such defects is the repair or replacement of a defective product or parts thereof by Edsal Manufacturing Company, Inc. or, at Edsal Manufacturing Company,
Inc option, refund of the purchase price upon return of the item to Edsal Manufacturing Company, Inc.. This warranty shall not apply in the event the
products are damaged as a result of misuse, neglect, accident, moisture, improper application, improper assembly, or assembly not in conformity with the
instructions of Edsal Manufacturing Company, Inc., failure to abide by safety precautions prescribed by Edsal Manufacturing Company, Inc or modification
or repair by persons not authorized by Edsal Manufacturing Company, Inc..
Adjustable Ceiling Storage Rack
Use two or more people to move and install this rack to avoid injury.
THANK YOU FOR YOUR PURCHASE
Model # ACR4896B
600 lbs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Muscle Rack ACR4896B
Summary of Contents for Muscle Rack ACR4896B
- Page 1 Adjustable Ceiling Storage Rack Model # ACR4896B USE AND CARE GUIDE Questions, problems, missing parts? Contact our customer service department for assistance: 7 a.m. - 5 p.m., CST, Monday-Friday: Chat: www.edsal.com/chat or www.edsal.com/contact Email: support@edsal.com Phone: 1-773-475-3131 To obtain replacement parts please provide: Model Number, Part Number & Description, Store Location and Date Purchased...
-
Page 2: Parts List
Parts List Side Brace #GLSB-48-B Left Beam #GLBML-B Ceiling Angle Upper Post Lower Post Right Beam Bracket #GLUP-B #GLLR-B #GLBMR-B #GLSA-B Cross Support Center Support #GLSTB-R-48-B #GLFTB-48-B End Wire Deck Center Wire Deck #GLWFDS-48 #GLWFD-48 Lag Bolt Hex Bolt Lock Nut Small Washer Large Washer Tools Required... - Page 3 Assembly Instructions Step 1 - Plan the Installation Determine if your ceiling rack will be installed parallel or perpendicular to the direction of your ceiling joists. Use a stud finder to locate the joists if ceiling is finished with drywall. Check the spacing of your ceiling joists to ensure that they will work for the size and direction of your ceiling rack install.
- Page 4 Assembly Instructions Step 2 - Install Ceiling Brackets (A) Locate and mark the center of ceiling joist with a pencil. Install Ceiling Angle Bracket (A) into marked joist us- Use a stud finder to locate the joists if ceiling is finished ing two Lag Bolts (K) and two Large Washers (O) with a with drywall.
- Page 5 Assembly Instructions Step 3 - Assemble Upper and Lower Posts (B & C) Determine desired height of ceiling rack from the ceiling to bottom of the overhead rack. Join the upper and lower post and line up the holes to the determined height. Bolt Upper Post (B) to Lower Post (C) using two Hex Bolts (L), two Lock Nuts (M) and four Small Washers (N).
- Page 6 Assembly Instructions Step 4 - Install Post Assemblies Continued For Perpendicular Assembly: Bolt together one post assembly through the hole located on the side of the post to the center hole of the inside angle of bracket using one Hex Bolt (L), one Lock Nut (M) and two Small Washers (N). The backside of the post must be facing in and the tapered ends of the post slots must be facing down.
- Page 7 Assembly Instructions Step 6 - Assemble Left and Right Beams (E & F) Bolt together one Left Beam (E) and one Right Beam (F) at the determined 72” or 96” length assembly by using four Hex Bolts (L), four Lock Nuts (M) and eight Small Washers (N). Repeat steps to assemble the other Left and Right Beam.
- Page 8 Assembly Instructions Step 8 - Install Center Support (G) Bolt the Center Support (G) into the two holes found in the middle of each beam assembly (see diagrams for reference to hole location on a 72” or 96” beam assembly). Use two Hex Bolts (L), two Lock Nuts (M) and four Small Washers (N) per side.
- Page 9 Assembly Instructions Step 9 - Install Cross Supports (H) Assemble the six Cross Supports (H) by placing the rivets located on both ends of the cross support into the triangular holes located on the top ledge of the both beam assemblies. ✓...
- Page 10 Assembly Instructions STEP 11 - Final Inspection Check each beam and post connection to be sure that the beams are properly seated and brackets are firmly connected to the overhead joists. Make sure all bolts and nuts are properly tightened. It is recommended to periodically repeat this inspection process to ensure safety.
Need help?
Do you have a question about the ACR4896B and is the answer not in the manual?
Questions and answers