4. Carefully withdraw tail light
assembly from recess and
remove.
5. Detach the cable from the
retainer.
6. Press the three retaining lugs and
remove the bulb carrier from the
light assembly.
7. Remove and replace the bulbs:
Turn light (1)
Tail light/brake light (2)
Vehicle care
On version with LED tail lights and
LED brake lights, only turn light
bulb (1) can be removed and
replaced.
8. Attach the bulb carrier to the light
assembly.
9. Attach the cable to the retainer.
10. Attach the light assembly to the
vehicle body and tighten the
securing nut from the inside of the
load compartment. Attach cover.
Depending on the version, tail lights
and brake lights are designed as
LEDs. In case of failure, have LEDs
replaced by a workshop.
233