» Specifications
Form Factor:
2 U rack mount chassis with 12 open drive bays
Construction:
Heavy Duty Cold Rolled Electroplated Steel
RAID Engine:
Intel IOP 341 XOR processor, 800MHz
Cache Memory:
512MB ECC DDR memory (STD) up to 2GB
Optional for 72hours battery backup
RAID Level:
RAID-0, 1, 1E, 3, 5, 6, 10, 50, 60, JBOD;
Hot-Spare, Hot-swap, Auto-rebuild
Raid Feature:
Multiple RAID selection & array roaming
Online RAID level/stripe size migration & capacity expansion
& volume set growth.
Volume instant availability and background initialization
Greater than 2TB per volume.
Supported disk scrubbing / array verify scheduling for
automatic repair of all raid sets.
Login record in the event log with IP address and service
Support MAID - spin down drives when not in use to extend
service life support NTP protocol to synchronize RAID
controller clock over the on-board ethernet port
Max 128 physical drives; Max 128 LUNs (volume set) per
controller
Drive Bay:
12 x Hot-Swappable 3.5" SATA-II hard drive bays with
cableless backplane, Supports SATA II Disk up to 3.0Gb/s &
NCQ
RAID Capacity:
From 0 to 12TB and beyond, depending on hard disk drive
capacity and RAID level.
RAID Management:
Configure and monitor by hyper terminal via RS232 and/or
Web browser via LAN/RJ45
20957 Currier Road Suite #D
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
DAS 8212FSA
2U, 12 BAYS DAS system
Fibre Host to SATA RAID system
RAID 6, 50, 60, JBOD
8 port KVM switch
» Features
» 2U rack mount chassis, only 26" depth
» 12 x SATA-II HD bays with cableless backplane
» Built-in RIAD engine with RS-232/LAN remote aceess
» 2 x 4Gb Fibre ports for servers/application failure clusting
» Embedded SMTP manager
» 1 4x mini SAS out port for additional JBOD (up to 7 boxes)
» 2 x 400W 1+1 110/220VAC power supply
Embedded SMTP manager monitors all system events, and
user can select to setup email alert notification to single or
multiple recipients
RAID Scalability:
Chained by tree structure up to total 84disks in 7 JDOB
boxes
Front LCD Control Panel:
LCD display with input buttons for setup, and error message
display system status indication through LCD, LED and alarm
buzzer; SES2 ready.
Rear Panel Connector:
2 Gb fibre FSP connectors support two servers/applications
failover clustering.
1 x 4x mini SAS 8088 out port
Power Supply:
2 x 400W 1+1 power supplies
Hardware Monitoring:
Front LCD indicator for RAID busy, power supply, fan,
temperature & FAN, voltage
Dimensions:
26" (D) x 3.5"" (H) x 19" (W)
Weight:
40lbs, without hard drive
60lbs, with hard drive
Certification:
FCC, UL
» Ordering Guide
DAS 8212FSA:
2U,
SAS to SATA 12 bays fibre to SATA RAID subsystem
with 2 x 400W 1+1 power supply.
» Options
CL-SAS:
3' SAS cable
© Copyright 2008 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes' web site at www.acnodes.com.