» Specifications
Form Factor:
3 U rack mount chassis with 16 open drive bays
Construction:
Heavy Duty Cold Rolled Electroplated Steel
RAID Engine:
Intel IOP 80321 XOR processor, 400MHz
Cache Memory:
256MB ECC DDR memory (STD) up to 1GB
Optional for 72hours battery backup
RAID Level:
RAID-0, 1, 3, 5, 6, 10, JBOD, HotSpare, Hot swap, Auto-
rebuild
Raid Feature:
Multiple RAID Selection & Array Roaming
Online RAID Level/Stripe size Migration & Capacity Expan-
sion & Volume Set Growth
Volume Instant availability and background initialization
Greater than 2TB per Volume
Supported Disk Scrubbing / Array Verify scheduling for
automatic repair of all raid sets
Login record in the event log with IP address and service
Support MAID - spin down drives when not in use to extend
service life Support NTP protocol to synchronize RAID
controller clock over the on-board Ethernet port
Drive Bay:
16 x Hot-Swappable 3.5" SATA-II hard drive bays with
cableless backplane, Supports SATA II Disk up to 3.0Gb/s &
NCQ
RAID Capacity:
From 0 to 12TB and beyond, depending on hard disk drive
capacity and RAID level, Allow Capacity Truncation for HDDs
RAID Management:
Configure and Monitor by HyperTerminal via RS232 and/or
Web Browser via LAN/RJ45
Embedded SMTP manager monitors all system events, and
user can
select to setup email alert notification to single or multiple
recipients
20957 Currier Road Suite #D
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
DAS 316SSA
3U, 16 BAYS DAS system
SAS Host to SATA RAID system
2TB per volume supported
keyboard touch pad
8 port KVM switch
» Features
» 3U rack mount chassis, only 21.20" depth
» 16 x SATA-II HD bays with cableless backplane
» Built-in RIAD engine with RS-232/LAN remote aceess
» 2 x SAS ports for servers/application failure clusting
» Embedded SMTP manager
» Scalability by 1 to 4 octopus SAS cable
» 2 x 400W 1+1 power supply (optional for 3rd & 4th P/S)
Drive insertion or removal:
Automatic detection and rebuilding
Rebuild hot spare drivers:
Automatic and transparently
RAID Scalability:
1 to 4 Octopus SAS 3-feet cable allows 1- server's SAS port
connect up to 4 x DAS 3166SSA syetms. (Optional).
1 x 3' SAS 1 to 1 Cable (standard)
Front LCD Control Panel:
LCD Display with Input Buttons for setup, and error mes-
sage display System Status indication through LCD, LED and
Alarm Buzzer; SES2 Ready
Rear Panel Connector:
Dual 4x mini SAS Connectors (2 x SFF8088) Support Two
Servers/Applications Failover Clustering
Power Supply:
2 x 1+1 400W power supplies, Optional for 3rd and 4th
additional 400W 1+1 power supply
Hardware Monitoring:
Front LCD Indicator for RAID Busy, Power supply, Fan,
Temperature & FAN, Voltage
Dimensions:
21.20" (D) x 5.25"" (H) x 19" (W)
Weight:
60lbs, without hard drive
85lbs, with hard drive
» Ordering Guide
DAS 316SSA:
3U,
SAS to SATA 16 bays RAID subsystem with 2 x 400W
1+1 power supply.
» Options
CL-DAS212SSA:
3' 1 to 4 Octopus SAS cable
© Copyright 2008 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes' web site at www.acnodes.com.