Stealth Cam FLX CAMERA Instruction Manual page 13

CAMERA SETUP (cont.)
Reduce Blur (Default – Advanced)
!
PROGRESSIVE – This setting will use a maximum exposure time of 1/125sec for the night
o
photos. Other adjustments are made to increase the brightness and clarity of the
photo.
o
ADVANCED – This setting will use a maximum exposure time of 1/40sec for the night photos.
o
STANDARD – This setting will use a maximum exposure time of 1/15sec for the night photos.
!
Photo Burst (Default – 1 Photo)
o
Capturing options will be 1 to 9 images with a 1.0 sec delay.
o
The options are 1 Photo, 2 Photos, 3 Photos, 4 Photos, 5 Photos, 6 Photos, 7 Photos, 8
Photos, and 9 Photos.
Burst Interval (Default – 1 second)
!
This setting allows the camera to set the time between each capture within a single triggered
o
event.
The options are 1 second, 2 seconds, 3 seconds, 4 seconds, and 5 seconds. (Note while in
o
30MP the interval can be 2-5 seconds)
IR Brightness Control (Default - Full)
!
Full - This enables the maximum power of the LEDs to have the brightest illumination
o
during night captures
Half - Reduces the power of the LEDs to reduce the frequency and effects of overexposing the
o
object.
Smart Illumination Technology (Default - OFF)
!
While enabled the camera will actively monitor the light level and and activate LED
o
illumination for a color image in the twilight hours.
www.stealthcam.com
877-­‐269-­‐8490
13
Page