Parts Description; Before The First Use - Princess 01.221206.02.001 Instruction Manual

Stick mixer
Table of Contents

Advertisement

Instruction manual
• Keep hands, hair, clothing, and utensils out
of container while processing to reduce the
risk of severe injury to persons or damage to
the appliance. A scraper may be used ONLY
when the appliance is not running.
• IMPORTANT: The chopping blades are very
sharp, and must be handled with care. When
handling the blades, always hold by the
shaft. Failure to do so will result in a risk of
laceration.
• THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
www.princesshome.eu

PARTS DESCRIPTION

1. Speed controller
2. Normal speed button
3. Turbo speed button
4. Release buttons
5. Stainless steel stick
6. 800ml Measuring cup
4

BEFORE THE FIRST USE

Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Place the device on a flat stable surface and ensure a minimum
of 10cm free space around the device. This device is not suitable
for installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50Hz).
Never use the mixer for longer than 1 minute continuously. After
this, allow the mixer to cool down for 5 minutes.
Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
USE
CAUTION: Always turn off and unplug from the wall power socket
before fitting or removing attachments.
CAUTION: DO NOT handle by the blade. The blade attachments
are very sharp. Use caution when handling and storing.
Connect the stainless steel stick (5) to the motor unit by aligning
the notches on the motor unit with the recesses on the
attachment. Press the attachment up onto the motor unit until it
clicks into place, securely locking the attachment and the motor
unit together.
Plug in the power cable to the wall socket.
To avoid splashing, place the blender shaft into your ingredients
before operating the blender. Select the optimal speed for
blending by turning the speed control dial (1) from 1 to 5, with one
being the slowest speed and five the fastest.

Advertisement

Table of Contents
loading

Table of Contents