Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Respirex MFC 180042
- Page 1 MFC Inflator/Deflator Product Manual...
- Page 2 Index Technical Data Safety Instructions Instructions for Use Repairs WARNING: Carefully read this manual before operating the MFC Inflator/Deflator. NOTICE: The manufacturer takes no responsibility for the consequences of actions not complying with the instructions given in this manual. © MFC International...
- Page 3 Technical Data Technical Data 110V 240V Product Code 180042 180041 Construction All Steel All Steel Motor 8.0 Peak HP (Two Motors) 8.0 Peak HP (Two Motors) Airflow 58,000 ft/min 58,000 ft/min 2 Stage Dual Fan 2 Stage Dual Fan Voltage 120V CE Approved 240V CE Approved Watts...
- Page 4 Safety Instructions When using the MFC Inflator/Deflator, these safety instructions should always be followed: For use on nominal 120/240 volt circuits in the UK & Europe (depending on version purchased). The Inflator/Deflator is fitted with a 16 amp plug (for 110V version) or 13 amp plug (for 240V version).
- Page 5 Instructions for Use Instructions for Use Lubricate the inside of the hose cuff with a moist cloth and then twist the cuff over the inlet /outlet collar and then nip up the clamp by hand. Before connecting the plug to the electricity supply ensure that the toggle switch/s is/are in the off position.
- Page 6 Repairs Repairs As a general rule, repairs/damaged products will need to be assessed in two categories: a) that which is repairable at the base, or b) serious damage that will need to be repaired by MFC International. If in doubt as to the extent of the damage and the level of repairs necessary, please contact the MFC service department on +44 (0)1443 433 075.
- Page 7 © MFC International...
- Page 8 MFC International Naval Yard Tonypandy Rhondda Cynon Taff CF40 1JS T. +44 (0) 1443 433 075 sales@mfc-international.com www.mfc-international.com SA-MA115-01 A Respirex International Limited Group Company...
Need help?
Do you have a question about the MFC 180042 and is the answer not in the manual?
Questions and answers