TECHWOOD TSV-3001 Instruction Manual page 8

B. Key to seal only.
the bag will be automatically sealed.
Note : The time interval between two seals must be at least 40 seconds.
2 - "Stop" button
Press this button to stop the unit immediately. Even during the work process.
3 - Indicator lights
Blue indicator light : The unit is in standby mode and turned on.
Red indicator light : The unit is working. The indicator light will turn blue again at
the end of the process.
Notes : Vacuum bags, striped, less than 30 cm wide may be used with this device.
Use good quality vacuum bags to get better sealing result.
In all cases, use striped vacuum bags.
1. Place the food in a special vacuum bag (Closed on the opposite side to the
opening).
Note : Leave at least 5 cm, between
the opening and food, to seal the bag.
2. Open the top cover,
3. Secure the left side of the sealing bag under the metal clamp (10).
4. Place the bag in the vacuum
chamber and ensure that the
opening of the bag is flattened.
Note : The opening side of the bag
must touch the two vertical pins (A),
located inside the vacuum
chamber.
METHOD FOR OPERATING VACUUM SEALING
USE
8