TECHWOOD TO-007 Instruction page 4

Do not operate the appliance with a damaged cord or plug, or
❑
after the appliance has been damaged in any manner.
If the supply cord or appliance is damaged,
❑
it must be replaced by the manufacturer or its service agent
❑
or a similarly qualified person in order to avoid a hazard.
Disconnect the power source cable before any operation of
❑
cleaning of maintenance and accessories assembly.
Never use the appliance outside and always place it in a dry
❑
environment.
Never use accessories, which are not recommended by the
❑
producer. They could constitute a danger to the user and risk
to damage the appliance.
Never use any other connector than the one provided.
❑
Never move the appliance by pulling the cord. Make sure the
❑
cord cannot get caught in any way.
Never wind the cord around the appliance and do not bend it
❑
Ensure that the power cord does not come into contact with
❑
hot parts of this unit.
Make sure the appliance has cooled down before cleaning
❑
and storing it.
The temperature of accessible surfaces may be very high
❑
when the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
Make sure the appliance never comes into contact with
❑
flammable materials, such as curtains, cloth, etc...& the
power cord and plug do not come in contact with water.
Before cleaning, always unplug the appliance from the power
❑
supply and let it cool down.
This appliance is not intended to be operated by means of an
❑
external timer or separate remote-control system.
Always place the unit on a flat surface. Ensure, also, not to
❑
cover the device and not to put anything on it.
4