Advertisement
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Stand the appliance on a table or flat surface.
● The item must not be left unattended when it is connected to main supply.
● Never modify the appliance in anyway.
● Do not use this product outside.
● Certain parts of the appliance can get hot. Do not touch them, as you may
burn yourself.
● Check if any object has fallen into the slot.
● Place the bread slices in the slot (for the French bread, cut a loaf shorter than
the slot, then cut it in two pieces along its length.). Your appliance is provided
to receive French bread, but also pieces of toast or other bread slices if their
thickness and their length are shorter than the slot.
● Press down the bread carriage handle until it stops (in the same time, the grid
inside the slot will tighten around the bread in order to keep it away from the
heating wires). Then release the pressure and the handle will stay in the lower
position, which means that the heating process has begun.
Note : If the handle comes up immediately, check if the appliance is plugged in as
it blocks only when the unit is plugged in.
● You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1
to 5. Therefore, you only have to turn clockwise to increase the intensity, and
anticlockwise to decrease it.
Note : The higher the number is, the more toasted the bread will be.
● During the functioning, if you think that the bread is toasted enough or for
another reason, you can stop the heating process, simply by pressing the
cancel "STOP" button.
● Always unplug the appliance after use and let it cool down before handling or
storing it.
● Before attempting any cleaning operation, make sure the toaster is unplugged
from the supply socket and fully cooled down.
● To remove bread crumbs slide the crumb tray situated on the side of the
appliance.
● Never use sharp objects to clean. Doing so could damage the appliance.
● To clean the exterior surfaces, simply wipe over with a soft damp cloth.
OPERATION
MAINTENANCE AND CLEANING
8
Advertisement
