Table of Contents
Advertisement
Turn on the unit. The LED light comes on.
Touch the aria with the exfoliating head. Press gently at
first then apply more pressure as you feel confortable.
NOTE : If you press too hard, the unit will stop spinning.
Move back & forth or side to side (around 2 or 3 seconds
at the same place) until callused skin is removed.
Change location and continue working for a while.
After you have reached desired results, turn the unit off by
sliding the power switch downwards.
Clean the head of the unit with the brush and replace the
cap over the head to protect it.
Before cleaning, Always : switch off the appliance.
Clean the outside of the apparatus with a sponge or slightly wet linen.
Never plunge the apparatus in water or all other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
Clean the exfoliating head after every treatment to maximize performance.
You may rinse the head under water by turning on the unit for about 10 seconds.
To change exfoliating head
As the exfoliating head dulls, you may need to replace it with one additional
exfoliating head.
With the unit turned off, press the head release button and remove the exfoliating
head.
Take a new head and snap it into the top of the unit.
-Ensure the unit is completely cool and dry.
-Keep the appliance in a cool, dry place and out of reach from children.
Before being delivered, all our products are subjected to a rigorous control.
This apparatus is guaranteed 24 months starting from the date of purchase of
consumer.
The documents in proof of guarantee are :
CLEANING AND MAINTENANCE
STORAGE
GUARANTEE
6
Advertisement
Table of Contents
