ACTi MNR-320P Quick Installation Manual
  1. Manuals
  2. Brands
  3. ACTi Manuals
  4. Voice Recorder
  5. MNR-320P
  6. Quick installation manual

ACTi MNR-320P Quick Installation Manual

16-channel transportation standalone nvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Installation Guide
MNR-320P
MNR-330P
16-Channel Transportation Standalone NVR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MNR-320P and is the answer not in the manual?

Questions and answers

Summary of Contents for ACTi MNR-320P

  • Page 1 Quick Installation Guide MNR-320P MNR-330P 16-Channel Transportation Standalone NVR...

  • Page 2: Before You Start

    BEFORE YOU START Thank you for purchasing ACTi Transportation Standalone Network Video Recorder (MNR). This guide contains all the information you need to quickly set up the MNR system via local display interface. For detailed instructions on installation and operation, please search for the product manuals on the http://www.acti.com/downloadcenter.
  • Page 3 AT A GLANCE FRONT PANEL USB Ports * Hard Disk Activity LED MNR-320P: USB 2.0 x 3, USB 3.0 x 1 Power Button MNR-330P: USB 2.0 x2, USB 3.0 x2 GPS Antenna Connector HDMI Port Hard Disk Bay VGA Port...

  • Page 4: Install The Hard Disk

    INSTALL THE HARD DISK MAKE SURE THE UNIT IS NOT CONNECTED TO POWER before installing the hard disk. Step 1 Step 2 Step 3 Loosen the two (2) Pull out the tray. Mount the disk on the thumbscrews. tray. Step 4 Step 5 Step 6 Secure the disk using the Slide the tray back into...

  • Page 5: Install Optional Modules

    INSTALL OPTIONAL MODULES To fulfill certain project requirements, contact ACTi sales representatives to purchase the following optional modules: • Wireless Module - provides Wi-Fi connectivity • 3G / 4G Module - provides 3G / 4G connectivity Refer to the instructions in the Installation Guide to install the optional modules and use the software utilities provided to complete the initial setup.
  • Page 6 START UP 1. On the front panel, press the POWER SWITCH to turn on the MNR. 2. On the Windows log on screen, type “123456” to enter the Windows system. NOTE: To assign a static IP address to the MNR, after entering Windows operating system, configure the network settings in Windows Network and Sharing Center. INITIALIZE THE HARD DISK After installing the hard disk, use the Windows Disk Management to initialize the disk to enable MNR to save the video recordings.
  • Page 7 5. Follow the wizard to create the disk volume, assign the drive letter and volume label. Repeat steps 4 and 5 to create other volumes, as needed. LOGIN 1. On Windows Destop, double-click to enter the NVR interface. 2. Input the default account and password to log in. Account: admin Password: 123456 “123456” is the default password of the NVR administrator’s user account.

  • Page 8: Create User Groups

    CREATE USER GROUPS On the NVR screen, click the Setup button to go to the Setup page. Then click the Users tab. By default, there is an Administrator group wherein all permission levels are enabled. To limit NVR access for a certain group of users, create user groups.

  • Page 9: Add Users

    ADD USERS After creating user groups, create individual users. 1. On the left panel, click the Users title bar, click Add to start adding a new user. 2. Input the user’s Account, Password, Email address and select its User Group, and then click Apply.

  • Page 10: Add Cameras

    3. Choose a search method based on your network environment and camera brand. To Search Cameras in the Local Area Network (LAN) • Click Hybrid Search to auto-search the network for ACTi cameras. • Click Search ONVIF Cameras to search for ONVIF-compliant cameras of any brand.

  • Page 11: Configure Camera Settings

    4. Drag on the time table to define the time session. 5. Click Apply. Note If you have any question during the system installation, please feel free to contact our engineers via ACTi Customer Help Desk platform at http://www.acti.com/ CHD. Quick Installation Guide...
  • Page 12 CUSTOMIZE LIVE VIEW 1. Click the View button to go the Live View page. 2. From the Camera list, drag a channel to a layout window. Repeat this process to add other channels. 3. On the View Toolbar, click to save the layout style and channel view. 4.
  • Page 13 Due to continuous product improvements, some contents may have changed from the time this documentation was printed. You can download the latest user documentation, which shall prevail over the printed version http://www.acti.com/downloadcenter provided in the package, from www.acti.com V.2016.10.28...

This manual is also suitable for:

Mnr-330p

Table of Contents