Before The First Use - TECHWOOD TSC-1215 Instruction Manual

• The heating elements remain warm for a long time after the
appliance is switched off.
• The "HOT SURFACE" symbol warns the user that the walls of
the appliance may become very hot and to take the necessary
precautions.
Switch off when not in use, even if for a moment
When the hairdryer is used in a bathroom, unplug it after use since the proximity of
water or taking a shower, presents a hazard even when the hairdryer is switched off.
when hand is wet, don't use the appliance
when the appliance is using ,don't jam in wind-in lid, so as towel, clothing.
• Stop the machine and unplug it if you drop it while you dry. Always disconnect
between two uses.
Before first use, remove the device and all accessories and being careful with
sharp accessories.
• Clean the apparatus according to the instructions in "Cleaning" paragraph.
• Place the machine on a suitable flat, stable surface.
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to that
indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground if
the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Never modify the appliance anyway.
● Depending on your choice, or not to fix the hub.
1. Always ensure the switch is set to OFF position before plugging the unit the
power outlet.
2. Unfold the handle
3. Use the high setting for drying hair, and use low setting for styling.
WARNING

BEFORE THE FIRST USE

USE
7