Use - easymaxx SP-11 Operating Instructions Manual

EN
Mains Power Mode
PLEASE NOTE!
■ Only plug the mains adapter into a plug socket once the cable has been connected
to the device.
■ Do not supply power to the device via a computer because the high currents that may
exist could damage the computer.
For mains power mode, the items supplied with the device include a cable (USB connec-
tor to barrel connector). A USB mains adapter is also required.
1. Plug the barrel connector of the cable which is supplied into the IN DC 6V socket (18)
on the device.
2. Plug the USB connector of the cable into the USB mains adapter.
3. Connect the USB mains adapter to an easily accessible plug socket whose voltage
corresponds to the specifi cation on the rating plate of the USB mains adapter. The
plug socket must also be readily accessible after connection.
The device can alternatively be operated with a standard mains adapter (6 V DC,
max. 1 A) and a cable with a barrel connector (
device). This is plugged into the IN DC 6V socket (18) of the device.

Use

The device can be used as a
• conventional radio;
• playback device for SD cards and storage media with a USB connector;
• speaker for external players (e.g. MP3 players) which are connected via Bluetooth
or a jack plug.
The device also has a socket for headphones.
Radio
1. To obtain the best possible radio reception, extend the telescopic aerial (12).
2. Switch on the device by pressing the POWER button (10).
3. Keep pressing the FUNC button (7) until the RADIO operating lamp (13) lights up.
The FM radio reception (VHF) is switched on.
4. To switch to AM reception (long, medium and short waves), press the FUNC button
again.
5. Select a radio station by turning the TUNING dial (14). Tilt and rotate the telescopic
aerial to improve the reception if necessary.
6. Adjust the volume with the VOLUME control (16).
18
) (not supplied with the
®