Advertisement
● Power Source
What are the power sources of the
D-RTK 2 Mobile Station?
How long does the internal battery
last?
Does the internal battery need to be
removed when the D-RTK 2 Mobile
Station is not in use?
Will the D-RTK 2 Mobile Station shut
down when switching to an external
power source?
● Using the D-RTK 2 Mobile Stations
Do I need to calibrate the D-RTK 2
Mobile Station with a reference
point?
How does the D-RTK 2 Mobile
Station sense movement and
determine if it is upright?
How do I import a fixed set of
coordinates into the D-RTK 2 Mobile
Station?
How do I run updates on the D-RTK
2 Mobile Station?
There are three power sources:
1. Internal battery WB37-4920mAh-7.6V
2. External battery (MG12000P)
3. AC power adapter
At least two hours. The battery can be charged through the external power port
on the D-RTK 2 Mobile Station, or removed and charged with the charger.
Yes. When not in use, please remove the battery. When powered off, the D-RTK 2
Mobile Station enters standby. If the battery is left in the D-RTK 2 Mobile Station,
it will stand by for 10 days and then power off automatically to protect the
battery, after which the battery needs to be changed or recharged.
When the internal battery is fully charged, the D-RTK 2 Mobile Station will stay on
for at least two hours. If an external power source is connected before the
internal battery is drained, the D-RTK 2 Mobile Station will continue to function,
otherwise it will shut down.
If there is a point with known location coordinates, simply place the D-RTK Mobile
Station exactly on that point then input the coorinates in the App. Make sure the
difference in distance between the input and actual coordinates is less than 5
meters, or the input will not work.
The D-RTK 2 Mobile Station is equipped with a high-performance IMU to monitor
the status of the device and send that information to the aircraft. If the D-RTK 2
Mobile Station is moved or toppled over, the aircraft will stop performing RTK
functions and display the status of the D-RTK 2 Mobile Station in the remote
controller app.
This can be done in the remote controller app, please see the user manual for
more information.
Log in to DJI ASSISTANT 2 with your DJI account, connect the D-RTK 2 Mobile
Station to the PC with a Type-C cable and run the firmware update.
Advertisement
