Summary of Contents for SenSource TB12 Series
- Page 1 PC-TB12-Series People Counter Non-Directional Wireless Sensor SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013...
-
Page 2: Table Of Contents
Side-Firing ............................................15 Non-Side Specific ..........................................15 Front-Firing............................................15 RX Unit on Right ..........................................15 Front-Firing............................................15 RX Unit on Left ..........................................15 INTEGRATION ............................................16 LIMITED WARRANTY ..........................................17 SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 3: Introduction
Impact/Shock: Heavy impact or shock may cause damage to hardware. Tampering: Changes or modifications not expressly approved by SenSource will void the warranty. Cleaning: Harsh cleaners, such as paint remover or benzene, may ruin the surface. Use a soft, wet cloth and mild soap or detergent to clean displays and lenses. -
Page 4: Hardware Overview
Do not over torque screws you may strip the threads in the enclosure. Battery life: It is recommended to change your batteries every six months to ensure system optimization. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 5: Hardware Diagram
***Battery life varies due to many factors including wireless network settings, use/traffic, and sensor configuration. SenSource recommends a regular maintenance program of new batteries every six months to ensure system optimization. Battery Type (Qty 4) 3.6v AA Lithium, 2x Each... -
Page 6: Prerequisites And Requirements
Destination or Hostname IP: (required) You must know the IP of the destination address or dedicated machine with SenSource software installed on to push to NOTE: If you are using our hosted solution then SenSource will provide the destination address. -
Page 7: Setup And Configuration
If you are still experiencing problems reseat your connections and try again. If you are still experiencing problems install the USB driver named CDM20814_Setup.exe located on the software cd. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 8: Tb12-R Non-Radio Tx Unit Configuration
High power is recommended for most applications. Click update. A confirmation box will appear to save a programming profile, choose save Y/N. You do not have to save if you do not want to. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226... -
Page 9: Tb12N-Wr (Wifi) Battery-Life Considerations
If sensors will be used in an area that receives full sun, the sensors should be tested in the desired mounting location, in full sun, prior to permanently mounting them on the walls or door frames. Use the ambient light diffuser grommets. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 10: Tb12N-Wr Wifi Rx Unit Configuration (Unit With The Lcd Display)
Port 6767 is default communication port Click update. A confirmation box will appear to save a programming profile, choose save Y/N. You do not have to save if you do not want to. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 11: Tb12N-Wr Wifi Tx Unit Configuration
High power is recommended for most applications. Click update. A confirmation box will appear to save a programming profile, choose save Y/N. You do not have to save if you do not want to. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226... -
Page 12: Tb12N-9R 900Mhz Rx Unit Configuration (Unit With The Lcd Display)
Direction: Front or Side Click update. A confirmation box will appear to save a programming profile, choose save Y/N. You do not have to save if you do not want to. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 13: Tb12N-9R 900Mhz Tx Unit Configuration
High power is recommended for most applications. Click update. A confirmation box will appear to save a programming profile, choose save Y/N. You do not have to save if you do not want to. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226... -
Page 14: Installation
(especially true for side-firing mode, where sensors are typically mounted on the doorframe). Ensure that the door does not break the beam when it opens or closes. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 15: Front-Firing (Opposing Wall Mount)
Note: To remove the sensors from the back-plate use the small, blue screwdriver to push on the locking tab in the small hole at point C, while pulling slightly on the sensor to release it from the back-plate. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 2/20/2013... -
Page 16: Integration
3. The sensor will show up in the unassigned category in your System Manager software 4. For more information on System Manager, Vea, or reports please visit our Knowledge Base at SenSource.com System Manager is used to define regions, districts, and facilities by breaking down your organization into a tree that interfaces with MS SQL, the Service Configuration Utility, and Vea View. -
Page 17: Limited Warranty
(under normal use) for one year from date of shipment from SenSource, Inc. or its authorized reseller. SenSource, Inc.'s sole obligation under this express warranty shall be (at SenSource, Inc.'s option and expense) to replace the product or part with a comparable product or part, repair the product or part, or —...
Need help?
Do you have a question about the TB12 Series and is the answer not in the manual?
Questions and answers