Vanguard Instruments CT-3500 S2 User Manual page 49

REV 1.1 CT-3500 S2 USER'S MANUAL
ERASE SHOT NUM:
Type the record number that you would like to erase using the keypad and then
press the
[ENTER]
print the test record directory using the instructions in section 3.6.6.
The following screen will be displayed while the record is being erased:
ERASing SHOT
PLEASE WAIT...
The following screen will be displayed when the test record has been completely
erased:
SHOT 001 ERASED!
Press any key to return to the "START-UP" menu.
45
key. If you do not know the test record number, you can first