First Use - TECHWOOD TFL-291D Instruction Manual

Before first use, remove the device and all accessories and being careful with
sharp accessories.
• Clean the apparatus according to the instructions in "Cleaning" paragraph.
• Place the machine on a suitable flat, stable surface.
• Unroll the power cord completely.
• Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
• Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
• Stand the appliance on a table or flat surface.
• Never modify the appliance in anyway.
Connect to the power supply,
Press the power switch 1 seconds long, LED display lights up, entering in the
work state.
Set temperature, Pushing + Button for up and – Button for down it.
During heating, the temperature displayed on the screen in "flashing".
Check the hair is wet before operating, as far as hair is not completely dry, you
can use the unit on it.
Straighten out the hair with the comb
Starting with the top of the head, seize a strand of hair of 5 cm broad and
introduce it between the ceramics plates.
Maintain a certain pressure and tension, and gently descend the apparatus while
making slip the strand enter the plates. (from the roots towards the ends).
CAUTION do not touch the hot part or plates of the apparatus with your hands or
your scalp.
Repeat the operation all around your head and wait until the hair cools before
combing them.
After use, switch OFF the unit.
When the hair is stiff, smoothing is complete (do not let the straightener contacting
the hair for too long).
For your safety, if you do not use the straightener, unplug it.
For best result, wash, comb and dry hair until just damp to touch although the
Ceramic Hair Straightener can be used for touch ups. at any time.

FIRST USE

USE
7