Acer PD523 User Manual page 26

User Controls
English ... 26
Management
(Computer / Video
Mode)
My Start-up Screen
Acer My Start-up Screen is a PC utility for user to
change the default start-up screen of Acer projector
to their desired image. You can install My Start-up
Screen from the bundled CD. Connect the projector
to your PC with the bundled USB cable then execute
My Start-up Screen utility to download your desired
image from your PC to projector.
Before the download starts, the projector must enter
"Download Mode" first. Please follow the instruc-
tion below to enter "Download Mode".
1. Plug AC power, "Temp" and "Lamp" LEDs will turn on
simultaneously.
2. "Temp" and "Lamp" LEDs will turn off and "Power"LED starts
to blink.
3. Press and hold "Menu/Enter" button then press "Power" button.
4. When "Temp" and "Lamp" LEDs turn on again, release both
buttons, projector enters download mode.
5. Please make sure the USB cable has been plugged and connected
to your projector.
Reset
Press the button after choosing "Yes" to return the display
parameters on all menus to the factory default settings.