Management - Acer PD520 User Manual

Computer / Video mode
Image-I Image-II
Language

Management

Menu Location
Lamp Reminding
Lamp Reset
Projection
Signal Type
RGB Component
Menu Location
Choose the Menu location on the display screen.
Projection
4
The factory default setting.
4
When you select this function, the projector reverses the image
The OSD does not
so you can project behind a translucent screen.
include a PIP menu
4
under Video mode.
When you select this function, the projector turns the image
upside down for ceiling-mounted projection.
4
When you select this function, the projector reverses and turns
the image upside down at same time. You can project from
behind a translucent screen with ceiling mounted projection.
Signal Type
Select signal type between RGB, HDTV and Component video
sources.
Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
Lamp Reset
Reset the lamp setting only when the new lamp is replaced.
User Controls
Audio
PIP
Management
HDTV
Front-Desktop
Rear-Desktop
Front-Ceiling
Rear-Ceiling
25
nglish