Ceton InfiniTV 6 ETH Quick Install Manual

1. Install a CableCARD from your Cable TV provider


Call or visit your cable TV provider and order a multi-stream CableCARD (M-Card) for a Ceton InfiniTV digital cable tuner.

Insert the CableCARD, with the bar code side down, into the CableCARD slot in the back of the InfiniTV 6 ETH.
2. Connect the Ceton InfiniTV 6 ETH to your home network

Connect the InfiniTV 6 to an Ethernet connection on your network or
router using the supplied Ethernet cable. Ensure InfiniTV and your PCs
are on the same subnet.

Attach a coax cable from your cable TV outlet to the Cable In F-
Connector on the back of the InfiniTV 6 ETH.

Plug the power supply into the InfiniTV 6 ETH and any standard
electrical outlet.

Turn your Windows 7 or 8 PC(s) on.

If your cable provider requires a Tuning Adapter:
of the supplied USB cable to the mini USB port on the InfiniTV 6 ETH
and the other end to the Tuning Adapter provided by your cable
provider.
If you're assigning one or more individual tuners to more than one PC, steps 3, 5 and 6 must be performed on each PC

3. Install the Ceton InfiniTV software on each PC


Download and run the Ceton InfiniTV Installer for the version of Windows you are using from the following link:
www.cetoncorp.com/infinitv/support/.

4. Update InfiniTV Firmware and Hardware Image


Open the Ceton Diagnostics application installed in step 3 from

Click on the Update

If you have the latest Firmware and Hardware images you will see "There are no updates available for your InfiniTV" on the Update tab and you can
move to step 5 below; otherwise select one of the next two options, depending on whether you wish to test the beta Tuner Pooling feature.
Install Without Tuner Pooling (recommended): Make sure the "Include beta updates" button is checked off.
o




Install With Tuner Pooling
o





Re-boot your PC.
5. Launch Media Center and run the Microsoft Digital Cable Advisor tool

Start Windows Media Center and navigate to Extras / Extras Gallery.

Run the Digital Cable Advisor
www.cetoncorp.com
InfiniTV 6 ETH Quick Install Guide
connect the small end
Steps 3-6 below must be performed on at least one PC.
Please note that Dynamic Tuner Pooling is currently a BETA FEATURE.
tab.
Select the Hardware version shown and click the
Once the update is finished unplug the power cable to your InfiniTV 6 ETH, wait 10 seconds and plug it back in.
Select the Firmware version shown and click the
Once the update is finished unplug the power cable to your InfiniTV 6 ETH, wait 10 seconds and plug it back in.
(beta – advanced users
Select the Beta Hardware version shown and click the
Once the update is finished unplug the power cable to your InfiniTV 6 ETH, wait 10 seconds and plug it back in.
Select the Beta Firmware version shown and click the
Once the update is finished unplug the power cable to your InfiniTV 6 ETH, wait 10 seconds and plug it back in.
and follow all instructions.
you will be using.
Start / All Programs / Ceton InfiniTV
Update button. The update can take several minutes.
Update button. The update can take several minutes.
only): Make sure "Include beta updates" button is checked on.
Update button. The update can take several minutes.
Update button. The update can take several minutes.
/ Ceton Diagnostics.
Ceton InfiniTV 6 ETH Quick Install Guide