ProMobility Magnet Harness User Manual

4. .

Adjusting the Webbing

1 2
. .
1. Feed keeper plate onto webbing as shown.
2. Then pass webbing through keeper plate
3. and through keeper plate again
4. return webbing through keeper plate
4

5. Spare Parts:

Magnet Button
Promobility Ltd.
Unit A3, Airside Enterprise Centre,
Airside Business Park, Swords,
Co. Dublin, K67 YY94, Ireland.
Tel: +353 (1) 8900890
Email: sales@promobility.ie www.promobility.ie
3
.
Then pass through assembly plate slot
to lock off webbing. This prevents
webbing from loosening.
Magnet Key Button Pin
Promobility Magnet Harness
It is important to read and understand this guide before installation and use of
the Magnet Harness, this will help ensure its optimal use and performance.
The Magnet Harness is designed for use as a postural support harness in a
vehicle, car, bus, etc. and is NOT a safety belt, you MUST ensure that the
Magnet Harness is used only in conjunction with the vehicles seat belt system
for the user's safety.
The Magnet Harness is designed for use by seated passengers and there are a
variety of sizes available to suit children up to adult.
The Magnet Harness is NOT a safety belt, but a fixation belt to ensure the user's
proper location on the vehicle seat.
The Magnet Harness must not be used for any purpose other than described,
the CE marking and warranty are only valid with correct use.
How To Use
1.
Maintenance
2.
3. Warranty
4. Adjusting the Webbing
5. Spare Parts
User Guide