Fitting The Docking Station - Bosch BSS8 Series Instruction Manual

Before using the appliance for the first time
5
56

Fitting the docking station

It is recommended that the docking
station is used for charging and sto-
ring the appliance as this takes up
less space.
However, it is also possible to char-
ge and store the appliance without
a docking station.
Fig.
‡ Fit the wall retainer close to a so-
cket.
‡ To do this, remove the front plate
from the wall retainer. Insert your
finger into the wall retainer from
below, and push the front plate
from the inside and out of the lo-
cking mechanism. Use the corres-
ponding screws to mount the wall
retainer on the wall.
Ensure that the retainer is moun-
ted with sufficient clearance to
the floor in order to guarantee that
the appliance is easy to insert and
remove.
‡ Insert the small connector on the
charging cable into the wall retai-
ner from below, and then up and
into the preformed recess.
1
‡ Put the front plate back on and
lock it in place to secure the con-
nection in place.
2
‡ Plug the charging cable's mains
plug into the socket.
Click
5