Lifetime 60001 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Outdoor Furnishing
  5. 60001
  6. Assembly instructions manual

Lifetime 60001 Assembly Instructions Manual

10' x 8' outdoor storage shed
Hide thumbs Also See for 60001:
Table of Contents

Advertisement

Quick Links

10' x 8' OUTDOOR
STORAGE SHED
MODEL #60091
MODEL 60001
BEFORE ASSEMBLY:
• Assemble on a level platform
• 3+ people for setup recommended
For Customer Service in mainland Europe and the United Kingdom:
E-mail: cs@lifetimeproducts.eu
TOOLS REQUIRED
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
Live Chat: www.lifetime.com
(click on "Ask An Expert" tab)
Video Instructions:
www.youtube.com/lifetimeproducts
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
5/16" (8 mm) Wood Drill Bit
5/16" (8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 60001
Product ID:

TABLE OF CONTENTS

Icon Legend...............................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................20
Door Assembly..........................24
Skylight Assembly.....................33
Floor Assembly.........................37
Wall Assembly...........................41
Parts Identifi er..........................49
Shelving Installation.................58
Roof Assembly..........................62
Door Alignment........................86
Shed Anchoring........................89
Cleaning & Care........................95
Registration...........................96
Warranty..............................97
(you will need both when contacting us)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 60001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lifetime 60001

Summary of Contents for Lifetime 60001

  • Page 1: Table Of Contents

    Shed Anchoring......89 Cleaning & Care......95 Registration......96 5/16" (8 mm) Masonry Drill Bit Warranty......97 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Live Chat: www.lifetime.com MODEL# AND PRODUCT ID Call: 1-800-225-3865 (you will need both when contacting us) (click on “Ask An Expert” tab) Model Number: 60001 7:00 am–5:00 pm (Monday–Friday) MST...
  • Page 2 5/16 po (8 mm) Foret à maçonnerie Garantie......98 ® QUESTIONS ? CONTACTEZ AUX SERVICES À LA CLIENTÈLE LIFETIME t’Chat en direct: www.lifetime.com N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Composer le 1-800-225-3865 (vous aurez besoin des deux lorsque vous nous contactez) (cliquer sur la languette «...
  • Page 3 Registro........96 5/16 in (8 mm) Broca de albañilería Garantía........99 ® ¿PREGUNTAS? PÓNGASE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com MODEL E ID DEL PRODUCTO Llamar : 1-800-225-3865 (necesitará los dos al contactarnos) (cliquee en la lengüeta «Ask An Expert») Número de modelo: 60001...

  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être prise lors de la lecture. • Indica que uno debe prestar atención al leer. •...

  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 1 yd (0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 96"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA...
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 2 in/po x 4 in/po x 118 1/4 in/po (5,1 cm x 10,2 cm x 3,00 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (5,1 cm x 10,2 cm x 2,30 m) (x9) 16d 3 in/po (16d x 7,62 cm) (x36) 1.2.1 •...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 22 1/4 in/po x 93 1/2 in/po x 3/4 in/po (10,2 cm x 2,38 m x 19,1 mm) (x1) 48 in/po x 93 1/2 in/po x 3/4 in/po (1,22 m x 2,38 m x 19,1 mm) (x2) 8d 1 1/2 in/po (8d 3,81 cm) (x66) 1.2.3...

  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje DTK (x14) ADY (x11) ADJ (6) CXK (x2) AHT (x1) DTJ (x1) ADK (x24) 11 9/16 in/po (29,4 cm) ADH (x3)
  • Page 12 • Encoche • Sin muesca • Muesca http://go.lifetime.com/trussassem10x8 • Note: Channel (DSR) has no notch at the end. • Remarque : Le canal (DSR) n’a pas d’encoche à l’extrémité. • Nota: El canalón (DSR) no tiene una muesca al extremo.
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADY (x8) ADK (x8) • Slide a Truss Brace (AFG) onto the Truss Gutter Channels as shown. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (11 mm) (x2) ADJ (x4) 11 9/16 in/po (29,4 cm) ADH (x2) • Slide a Truss Rod (ADH) through the holes in the Brace and Connector.
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x4) ADK (x4) CENTER TRUSS (x1) / FERME CENTRALE (x1) CERCHA CENTRAL (x1) •...
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADY (x2) ADK (x2) • Slide a Truss Brace (AFG) onto the Truss Gutter Channels as shown. •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.11 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Page 18 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (11 mm) (x2) ADJ (x2) 11 9/16 in/po (29,4 cm) ADH (x1) 2.13 • Slide a Truss Rod (ADH) through the holes in the Brace and Connector. Secure with two Cap Nuts (ADJ). •...
  • Page 19 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) ADK (x1) ADY (x1) AHT (x1) 2.14 • Only tighten the Nut (ADK) by hand in this step. •...

  • Page 20: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ACB (x0/2) ADZ (x8) AGP (x2) AIQ (x2) ADV (x10) ADW (x10) AEE (x10) AHS (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Align the holes in the Left (AGH) and Right (AGI) Side Gable Halves. • Alignez les trous dans les pignons latéraux gauche (AGH) et droite (AGI). •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x10) ADW (x10) AHS (x2) ADV (x4) • Insert an End Cap (AHS) into each end of the Header •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) AHS (x2) AEE (x5) ADV (x6) • Place the Screen (AIQ) over the Vent (AGP) and •...

  • Page 24: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x6) ADJ (x4) AEE (x6) ABU (x4) AHM (x4) AHZ (x2) DZG (x2)
  • Page 25 79 1/2 in/po (2,02 m) CRD (x1) http://go.lifetime.com/leftdoor8foot • Note: Door Channels (BLH) are bowed by design ensuring a tight fi t when closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x4) DZG (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as shown.
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po ADW (x6) ABU (x4) (11 mm) DZG (x1) AHZ (x2) AEE (x6) AIA (x2) ADJ (x4) •...
  • Page 28 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Bolsas de herraje Sacs de quincaillerie ADW (x8) ABV (x4) AEE (x10) AAB (x4) AEB (x4) AHY (x2) ADB (x4)
  • Page 29 79 1/2 in/po (2,02 m) CRD (x1) http://go.lifetime.com/rightdoor8ft • Door Channels (BLH) are bowed by design ensuring a tight fi t when closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 30 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIK (x2) AEE (x6) AIO (x2) ADW (x6) • Slide the Thumb Lever (AIO) down into the grooves •...
  • Page 31 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) AIL (x2) ABV (x4) AAB (x4) AHX (x2) AEB (x4) AHV (x2) ADB (x4) •...
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHY (x2) AHW (x2) ADW (x2) • Attach the Bracket (AHW) using a Screw (ADW), and attach the Spring (AHY).

  • Page 33: Skylight Assembly

    DOMED SKYLIGHT ASSEMBLY / ASSEMBLAGE DES LUCARNES EN FORME DE DÔME / ENSEMBLE DE LOS TRAGALUCES EN FORMA DE CÚPULA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje EFA (x24) AEE (x48) AHI (x2) ADK (x24) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 34 • Si tiene problemas con esta sección, siga el código debajo para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/domedskylight • Lay the Butyl Tape (AHI) over the groove along the top edge of the opening in the Roof Panel, and cut it. Peel back the paper backing a bit, and continue laying the Butyl Tape along the groove being sure to slightly overlap the ends.
  • Page 35 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Run your thumb along the Butyl Tape to remove any bubbles. Then, completely remove the paper backing. •...
  • Page 36 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADK (x24) AEE (x48) EFA (x24) • Remove the protective plastic from both sides of the Skylight (AGB). Align the holes in the Domed Skylight with those in the Roof Panel, and insert the Screws (EFA).

  • Page 37: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag Sac de quincaillerie / Bolsa de herraje AHO (x4) ADC (x1) BQC (x20) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Nota: Estos no son Tornillos de anclaje.
  • Page 38 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an Inner Floor Panel (CUD) at an angle and slide the tabs along the edge underneath an Outer Floor Panel (CUW).
  • Page 39 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x4) • Attach an Outer Floor Panel (CUW) to the Inner Floor Panel. • Attachez un autre panneau de plancher intérieur (CUW) au panneau de plancher intérieur.
  • Page 40 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x18) • Insert the Screws (BQC) through the divots in the Floor Panels and into the tabs of the adjacent Floor Panels. (The divots are near the seams of the Floor Panels.) These are not anchoring screws.

  • Page 41: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x4) ADY (x1) ADW (x28) ADZ (x58) AIS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 42 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPI (x2) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Narrow Window Wall Panel (BDH &...
  • Page 43 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x28) • Peel off the protective backing from both sides of Window Pane (BDV). Align the holes in the Pane with those in the Panel, and gently set a Window Pane down onto the Panel.
  • Page 44 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADY (x1) • Peel off the protective backing from both sides of Window Pane (AHE). With the curved edge at the top and facing toward you, slide the Window Pane down into the opening.
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIS (x2) ADZ (x4) • Attach the two (2) Window Latches (AIS) at the top corners of the Panel opening. The Latches should move freely. •...
  • Page 46 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) • Insert tabs at the bottom of the Right Window Wall Panel (BDI) into the third and fourth slots from the front, right corner of the Floor.
  • Page 47 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) • You may install the Side Doors on either end; however, you will • Insert tabs at the bottom of the Corner Panel (AGN) need to install the Corner Panels (AGN &...
  • Page 48 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Secure the two Panels using fi ve (5) Screws (ADZ). • Attachez bien les deux panneaux à l’aide de cinq (5) vis (ADZ). •...

  • Page 49: Parts Identifi Er

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDK (x1) BDJ (x1) AGF (x1) BDC (x1) AGH (x1) AGI (x1) AGQ (x4) CUW (x2) AHB (x2) AFV (x1) AFY (x3)
  • Page 50 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 1 / KIT 1 PIÈCES EN MÉTAL KIT 1 DE PIEZAS DE METAL 79 1/2 in/po (2,02 m) CRD (x2) 75 1/2 in/po (1,92 m) BLH (x2) 50 9/16 in/po (1,28 m) DSR (x1) 46 in/po (1,17 m)
  • Page 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 BDH (x1) BDI (x1) AHD (x4) AHH (x1) AGY (x1) AGN (x1) AGL (x1) AGW (x1) BDV (x2) BDK (x1) BDJ (x1)
  • Page 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF SMALL PARTS BOX / CONTENU DE LA BOÎTE DE PETITES PIÈCES CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS AFZ (x4) AFW (x1) EPI (x2) AGG (x1) DRB (x1) AHE (x1) AHC (x4) AGB (x2)
  • Page 53 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x20) 8.11 • Insert Wall Panels (AHD & AHH) along the rear of the Floor one at a time, and slide them to the right. Secure with Screws (ADZ).
  • Page 54 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x15) 8.13 • Insert Wall Panels (AHD) along the left side of the Floor one at a time, and slide them toward the rear. Secure with Screws (ADZ).
  • Page 55 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) 8.15 • Insert tabs at the bottom of the Left Window Wall Panel (BDH) into the third and fourth slots from the front, left corner of the Floor.
  • Page 56 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 8.16 • Four (4) Screws (ADZ) are used to attach the Channel (AFM). • Quatre (4) vis (ADZ) servent pour attacher le support (AFM) au panneau mural. •...
  • Page 57 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 8.17 • Four (4) Screws (ADZ) are used to attach the Channel (AFM) to the Wall Panel. The top hole does not use a Screw.

  • Page 58: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x2) ADZ (x14) ADZ (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 59 El canal de soporte para la pared izquierdo se sujeta dentro de la ranura a la derecha de la muesca en el panel de pared. http://go.lifetime.com/90shelf • Top End • Extrémité suprieure • Extremo superior...
  • Page 60 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the Shelf Brackets (AIY) into the slots in the Wall/Shelf Support Channels. The Brackets must be at the same height. •...
  • Page 61 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) • Select the corner in which you would like to install a Corner Shelf (AFZ). Fold up the fl aps of the Shelf, and align the holes in the tabs with those in the Corner Wall Panel.

  • Page 62: Roof Assembly

    ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje DTV (x2) CXK (x2) ADX (x28) ADZ (x160) BHJ (x2) AEE (x2) AHP (x4) AIC (x1) AXX (x2) AIM (x1)
  • Page 63 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico BDJ (x2) BDK (x2) (x2) AGQ (x4) (x2) (x1) AFY (x3) DRA (x1) BDR (x1) BDS (x1) AHC (x4)
  • Page 64 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 10.1 • Pull the Hinge Tube down out of the Left Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 65 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.2 10.3 • Repeat the last step for the Right Door. • Slide the holes in the Entry Gable (AGF) down over •...
  • Page 66 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.5 • Place a Side Truss into the notches on the rear Wall Panel and Right Front Window Wall Panel. While another adult holds this in place, continue to the next step.
  • Page 67 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.7 • Align the four holes in the Wall Panel with those at the bottom of the Roof Panel, and insert four (4) Screws (ADZ) to secure the Panel in place.
  • Page 68 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.8 • Insert the fi rst two Screws (ADZ) through the Gable and into the Roof Panel with Skylight at the locations shown. Insert the Roof Support (AFL) into the notches in the Gable and between the Truss and the Roof Panel.
  • Page 69 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) 10.9 • Insert two (2) Screws (ADZ) through the Gable and two (2) Screws (ADZ) through the Truss and into the Roof Panel at the locations shown.
  • Page 70 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x36) 10.10 • Attach the Side Gable to the Shed using fourteen (14) Screws (ADZ). • Attachez le pignon latéral à l’abri à l’aide de quatorze (14) vis (ADZ). •...
  • Page 71 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.12 • Place the back of the Center Truss into the notch on the center rear Wall Panel. Then, lift the front of the Truss up so the ends of the Roof Support Tube touch the Side Trusses.
  • Page 72 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) DTV (x2) AEE (x2) CXK (x2) 10.13 • Secure the ends of the Support Tube to the Side Truss Channels using the hardware provided. •...
  • Page 73 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 10.14 • Repeat step 10.1–10.2. • Répétez l’étape 10.1 – 10.2. • Repita el paso 10.1–10.2. 10.15 •...
  • Page 74 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x1) 10.16 • Slide the holes in the Entry Gable down over the two Hinge Tubes. •...
  • Page 75 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) ECS (x1) BZA (x1) ADK (x1) AEE (x2) 10.18 • Attach the two center, rear Roof Panels using only one Roof Support per Panel.
  • Page 76 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ECR (x1) ADZ (x12) BZA (x1) ADK (x1) AEE (x2) 10.20 • Repeat the last step for the Left Drainage Plate (ECR). •...
  • Page 77 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADZ (x2) 10.22 • Secure the Drainiage Plate from step 10.16 to the Roof at the location shown.
  • Page 78 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.24 • An adult must apply a downward pressure on Panel (DRB) while another inserts these Screws (ADZ). •...
  • Page 79 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BHJ (x2) 10.26 • Use an electric screwdriver to Insert a Self Tapping Screw (BHJ) through the plastic of the Gable and into the Right and Left Door Hinge Tubes at the location shown.
  • Page 80 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) 10.27 • Starting at the right, attach the Roof Caps to the shed using the hardware provided. •...
  • Page 81 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x24) AED (x24) AXX (x2) 10.28 • Fold the Skylights (AHC), and attach them to the Roof using six (6) Screws (ADX) and Washers (AED) for each Skylight.
  • Page 82 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) AIM (x1) AIC (x1) 10.30 • Attach the Left (AIC) and Right (AIM) Gap Flaps to the corners of the Doors using the hardware provided. These Flaps simply serve to block out light.

  • Page 83: Pegboard Strip Installation

    PEGBOARD STRIP INSTALLATION / INSTALLATION DE L’ORGANISEUR D’OUTILS / INSTALACIÓN DEL ORGANIZADOR DE HERRAMIENTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIJ (x2) ADW (x10) AIG (x1) AIH (x3) AIF (x1) AII (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts /...
  • Page 84 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x10) 11.1 • Attach the Pegboard Strip (AFU) to a Wall Panel using fi ve (5) Screws (ADW). Align the holes on non-groove areas of the Wall Panels.
  • Page 85 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIG (x1) AIF (x1) AIH (x3) AII (x3) AIJ (x2) 11.2 • Insert the various Hooks (AIF, AIG, AIH, AII, AIJ) as shown. •...

  • Page 86: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje NO HARDWARE REQUIRED FOR THIS SECTION AUCUNE QUINCAILLERIE REQUISE POUR CETTE SECTION NINGÚN HERRAJE REQUERIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Wood Parts /...
  • Page 87 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS AIX (x4) • If the Doors are not level, follow the steps on this page or the next to even them out. •...
  • Page 88 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS AIX (x4) 12.2 • If the Left Door is higher, insert a Shim (AIX) underneath the bottom, right corner of the Right Door until it’s the same height as the Left Door.

  • Page 89: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO HARDWARE INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS NO PARTS REQUIRED FOR THIS SECTION AUCUNE PIÈCE REQUISE POUR CETTE SECTION NINGUNA PIEZA REQUERIDA PARA ESTA SECCIÓN...
  • Page 90 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (8 mm) 13.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16"...
  • Page 91 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (8 mm) 13.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 92 NOTES / REMARQUES / NOTAS...
  • Page 93 NOTES / REMARQUES / NOTAS...
  • Page 94 NOTES / REMARQUES / NOTAS...

  • Page 95: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 96: Registration

    REGISTER today! ENREGISTREZ VOTRE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.

  • Page 97: Warranty

    All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.
  • Page 98 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. © Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expéditions aller et retour de l’usine ne sont pas couverts et sont à...

  • Page 99: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Page 100 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al: 1-800-424-3865 De lunes hasta viernes 7:00 hr–17:00 hr Horario Éstandar de la Montaña (MST) y sábados 9:00 hr–13:00 hr (MST)

Table of Contents